Add to Cart
M6 M8 M10 M12 Galvanized Cast Iron Beam Clamp
Products:Beam Clamp
Malleable Beam Clamps are secured to the outside of an I-beam, girder, or other structural member to provide a mounting base for conduit hangers or threaded rod.
Features:
1. Material: Cast Malleable Steel with hardened cup point set screw
and jam nut;
2. Finish: Electro-galvanized finish for enhanced corrosion
protection, Available in hot dip galvanized finish (special order);
3. Features: May be used on top or bottom flange of the beam.
Beveled lip allows hanging from top flange where clearance is
limited. may be installed with the set screw in the up or down
position. Offset design permits unlimited rod adjustment by
allowing the rod to be threaded completely through the clamp. The
rear window design permits inspection of thread engagement;
4. Function: For attachment to structural shapes requiring wider
throat especially under roof with bar joist construction. This
clamp may be used with the set screw in the up or down position;
5. Note: Do not over tighten set screw.
Applications:For attachment to structural shapes requiring wider throat
especially under roof with bar joist construction. This clamp may
be used with the set screw in the up or down position.
Certification:
Material:Carbon Steel, Malleable Iron and Forged Steel are used in the manufacturing of beam clamps and accessories. Stainless steel and other materials are available.
Part No. | Fmax(kN) | H1 (mm) | G (mm) | S (Bolt&Nut) | PCS/Box | Surface Finished |
BC-M6 | 1.1 | 18 | M6 | M6 | 50 | EG/HDG/SS304/SS316 |
BC-M6-T | 1.1 | 18 | 7 | M6 | 50 | EG/HDG/SS304/SS316 |
BC-1/4 | 1.1 | 18 | 1/4 | 1/4 | 50 | EG/HDG/SS304/SS316 |
BC-1/4-T | 1.1 | 18 | 7 | 1/4 | 50 | EG/HDG/SS304/SS316 |
BC-M8 | 1.1 | 18 | M8 | M8 | 50 | EG/HDG/SS304/SS316 |
BC-M8-T | 1.1 | 18 | 9 | M8 | 50 | EG/HDG/SS304/SS316 |
BC-5/16 | 1.1 | 18 | 5/16 | 5/16 | 50 | EG/HDG/SS304/SS316 |
BC-5/16-T | 1.1 | 18 | 9 | 5/16 | 50 | EG/HDG/SS304/SS316 |
BC-M10 | 2.4 | 20 | M10 | M0 | 50 | EG/HDG/SS304/SS316 |
BC-M10-T | 2.4 | 20 | 11 | M10 | 50 | EG/HDG/SS304/SS316 |
BC-3/8 | 2.4 | 20 | 3/8 | 3/8 | 50 | EG/HDG/SS304/SS316 |
BC-3/8-T | 2.4 | 20 | 11 | 3/8 | 50 | EG/HDG/SS304/SS316 |
BC-M12 | 3.1 | 27 | M12 | M12 | 25 | EG/HDG/SS304/SS316 |
BC-M12-T | 3.1 | 27 | 13 | M12 | 25 | EG/HDG/SS304/SS316 |
BC-1/2 | 3.1 | 27 | 1/2 | 1/2 | 25 | EG/HDG/SS304/SS316 |
BC-1/2-T | 3.1 | 27 | 13 | 1/2 | 25 | EG/HDG/SS304/SS316 |
Product Show:
Package: