Two Pot Machinery GT4 Electric Dual Rear Caliper 28mm Aluminum Alloy

Alloy Brake System GT4 Dual Rear Caliper Electric Machinery Caliper

Good Brake System

First, a good brake has little heat exhaustion. There are two ways to solve the brake failure caused by high brake temperature. One is to solve it from the material, and the other is to solve it from the heat dissipation. The perforated disc replaced by Xiaobian is optimized from the heat dissipation, and the replaced high-temperature brake pad is optimized from the material. If necessary, add a brake ventilation pipe, Forced cooling of brake calipers and discs.

Second, good brakes have good braking linearity. The braking linearity is closely related to the caliper structure. Most of the car types sold in the market are single piston structure. One side piston pushes the brake pad while the other side pulls the brake pad, while the opposite piston pushes the brake pad inward at the same time, so as to make the brake pad stress more uniform, Therefore, some car clubs have replaced the original single piston caliper with opposed two piston and four piston calipers in order to better brake linearity.

Third, a good brake has good wear resistance, and durability is also very important for the brake. How to modify the durability of the brake disc? The simplest way is to reduce the pressure of the brake pads and brake discs. Assuming that the braking force required for braking is certain, after changing the large-diameter brake disc, the pressure exerted by the brake pads will be reduced, and the braking system will not be so expensive. The longer the circumference of the large-diameter brake disc, the larger the utilization area of the disc, and the better the braking durability!

There are several points to pay attention to when refitting the street car brake system.

The first point is the number of pistons in the brake caliper. The opposed small six piston caliper is not necessarily better than the large four piston caliper. The piston needs brake oil to drive its work. The oil supply of the original brake master cylinder of our car is certain.

The more pistons, the greater the amount of oil required, and the more pistons pushed by the brake master cylinder, The terrible thing is that the power of your brake to the end is not 100%. Such brake modification will only bring disaster, so don't blindly pursue multi piston calipers when modifying the brake.

The second point is the distribution of front and rear braking force. Some people say that our car has changed the big four caliper suit in front and the original brake in the back, which will lead to excessive braking force in front and lock up. In fact, it is just the opposite.

For example, if the front and rear pistons need oil supply of 2:1 when braking with full force, the oil supply will become 4:2 when changing the big four piston caliper, that is to say, when the braking force of the front wheel reaches half, the braking force of the rear wheel has reached 100%.

Of course, this data is inaccurate, but in the actual process, The temperature of the rear wheel brake disc of a vehicle that only changes the front wheel brake will be much higher than before. The rear brake that didn't smoke before will now smoke. That's why there are front and rear brake force adjustment devices on the car. Therefore, Xiaobian's suggestion is that it is best to change the supporting scheme before and after changing the brake, such as the first four, the second two, the first six, the fourth, the first big four, the second small four, etc.

Guangzhou Yuanxing Industrial Co.Ltd was established in 2017 and is located in Room 302, building 5, No. 7, Laowu street, Dongping village, Yongping street, Baiyun District, Guangzhou ,China. The location is very excellent and the transportation is convenient. We have very rich industry experience and is a trusted supplier. The company has production equipment and skilled front-line employees. Our boss has been engaged in the transformation of automobile braking system since 2011, have about 10 years of experience in this industry. Since 2017, we have set up our own factory, which can provide you with the best price and the best quality products. We specialize in producing aluminum alloy center cap and bracket, which can be customized according to different car models. Meanwhile we also sell complete set brake kit included brake calipers/brake disc rotors/brake pads/brake hose/aluminum center cap and brackets. Our products have strict quality control from the procurement of raw materials to the sale of finished products. Our company purpose is customer first, trying our best to meet the needs of customers. Our company's products are sold worldwide. With excellent quality and reasonable value, quality service, to win the trust and praise of our customers . Warmly welcome to visit our company and factory. We sincerely welcome friends from all over the world to visit our company and cooperate with us on the basis of long-term mutual benefits. We are looking forward to receiving your enquiry soon.