HP1000 Semi Metal Car Brake Pads GT6 Friction Coefficient 0.40-0.45μ Audi BMW VW

HP1000 Semi-metal GT6 pad Friction coefficient 0.40-0.45μ Audi/bmw/vw

product Introduction

Product advantages

safety is with you

Advanced formula with high coefficient of friction and stability Ensure your safety even during high speed or emergency braking

Excellent braking feeling, responsive, Advanced production technology minimizes noise and jitter

01. Friendly To Disc
No dust no noise,friendly to disc

Short Braking Distance
02. Short braking distance, excellent braking performance

03. Alarm Device
Some parts number with wear sensor

04. Long Life Time
Long life time 20,000-30,000kms

05. High Temperature Resistance
Ceramic formula up to 650℃ stable braking keep safety

When do you need to change the brake pads?

The replacement time period of brake pads and brake discs is not fixed, which depends on the driving conditions of the vehicle, the frequency and strength of the driver's brake pedal. Generally, the replacement mileage of conventional brake pads is about 25,000-30,000 kilometers per driving.

01. Brake pad thickness is too low

02. Instrument indicator light alarm

03. Wear indicator touches brake disc

04. Brake pad is covered with oil

05. Generate severe wear

06. Abnormal wear of brake pad

The following are some special cases that need attention

01. Drivers who have just passed the driver's license generally step on the brakes more, and the consumption will be higher.

02. The automatic transmission costs more brake pads than the manual transmission, because the automatic transmission depends on the accelerator pedal and the brake pedal.

03. The wear of the brake pads of a car in the urban area will be faster than that of a car in the highway. Because you often drive in urban areas, you often have to stop and go, and you will use more brakes. It may take dozens of kilometers to slow down or stop when walking on the highway, and there are relatively few opportunities to use the brakes.

04. The brake pads are worn out on a car with a large load. The deceleration brake at the same speed, the heavy car has a large inertia, and the friction force of the brake pads is large, so the wear is large.

What are the tips for brake pad alarms

1. Tips of trip computer:

A red word "please check the brake pad" will appear in the general alarm. Then there is an icon, which is a circle surrounded by dotted brackets. Generally, the display indicates that it is close to the limit and needs to be replaced immediately.

2. Warning of brake pad:

In some old vehicles, the brake pads are not connected to the driving computer, but a small iron plate for alarm is installed on the brake pads. When the friction material is worn away quickly, the brake disc will not wear the brake pad, but the small iron plate for alarm. At this time, the vehicle will make a harsh "chirp" sound of friction between metals, which is the signal to replace the brake pads.

3. Simple daily self inspection methods:

Check whether the brake pad and brake disc are thin. You can use a small flashlight for observation and inspection. When it is found that the black friction material of the brake pad is rapidly worn out and the thickness is less than 5mm, it should be considered to replace it.

4. Car feel:

Experienced drivers may feel that the brakes are soft when the brake pads are not available. This depends on the driver's feeling of driving for many years.

Guangzhou Yuanxing Industrial Co.Ltd was established in 2017 and is located in Room 302, building 5, No. 7, Laowu street, Dongping village, Yongping street, Baiyun District, Guangzhou ,China. The location is very excellent and the transportation is convenient. We have very rich industry experience and is a trusted supplier. The company has production equipment and skilled front-line employees. Our boss has been engaged in the transformation of automobile braking system since 2011, have about 10 years of experience in this industry. Since 2017, we have set up our own factory, which can provide you with the best price and the best quality products. We specialize in producing aluminum alloy center cap and bracket, which can be customized according to different car models. Meanwhile we also sell complete set brake kit included brake calipers/brake disc rotors/brake pads/brake hose/aluminum center cap and brackets. Our products have strict quality control from the procurement of raw materials to the sale of finished products. Our company purpose is customer first, trying our best to meet the needs of customers. Our company's products are sold worldwide. With excellent quality and reasonable value, quality service, to win the trust and praise of our customers . Warmly welcome to visit our company and factory. We sincerely welcome friends from all over the world to visit our company and cooperate with us on the basis of long-term mutual benefits. We are looking forward to receiving your enquiry soon.