

Add to Cart
Jekit Car Brake Parts Customized Center Bell Bracket Bolts Kit
Product parameter
Item Name | Center Bell And Bracket And Bolts |
Sue For | Connect Car And Brake Disc |
Package | Neutral Packing |
Quality | 100% Tested |
Full set included | 1 pair center bell /1 pair bracket /1 set bolts |
introduce
The materials of center bell and bracket are mainly as follows:
aluminum alloy 6061-T6, aluminum alloy T-7075, iron.
Aluminum alloy material has the characteristics of high strength,
light weight and good heat dissipation. For the brake system,
aluminum alloy material has a huge advantage, so aluminum alloy
material is used in most cases.
6061-T6: Aluminum alloy accounted for 97.9%, magnesium accounted
for 1%, silicon accounted for 0.6%, and 0.28% copper and 0.2%
chromium (Chromium) were added.
T-7075: The main metal elements of aluminum and zinc accounted for
90% and 5.6% respectively, the others are magnesium, 2.5%, copper
1.6%, chromium 0.23%, and the remainder are silicon and manganese.
, Titanium and other metal elements.
The strength of 7075 aluminum alloy is generally higher than that
of 6061 aluminum alloy, and this is mainly because the content of
aluminum alloy in 7075 aluminum alloy is nearly 8% less than the
aluminum contained in 6061.
The iron material is the hardest among the three materials, but it
can only be used for brackets. Usually used with aluminum alloy
6061-T6 center bell. Everyone must be familiar with iron. Iron
brackets usually buy primary colors because iron cannot be oxidized
and colored. Although iron is the hardest material, it is also very
easy to rust. Therefore, after receiving the iron bracket, the
general buyer will do some treatment to prevent rust.
6061-T6 Aluminum
The 6061 aluminum alloy bell and bracket is the most we sell, and
it is also the most suitable material for living and using
automobiles.
6061 T6 has high strength, high hardness (up to HV90 degrees or
more), good processing effect, and good oxidation effect. There are
no trachoma pores, and the flatness is better. Improve processing
efficiency and reduce material costs. This will be the best choice
for low-price, high-quality materials. The 6061-T6 series is an
alloy of aluminum, magnesium, and silicon. It is a heat-treated
corrosion-resistant alloy. The strength and corrosion resistance
are relatively good, and the uniformity is good. The density of
6061 aluminum alloy is 0.0000028.
6061T6 aluminum has high strength, high hardness (up to HV90
degrees or more), good processing effect, and good oxidation
effect. There are no trachoma pores, and the flatness is better.
Improve processing efficiency and reduce material costs. This will
be the best choice for low-price, high-quality materials. The
6061-T6 series is an alloy of aluminum, magnesium, and silicon. It
is a heat-treated corrosion-resistant alloy. The strength and
corrosion resistance are relatively good, and the uniformity is
good.
Reference picture