8K Finish Cold Rolled Stainless Steel Coil UNS S30403 S31600 S31603

Stainless Steel Cold Rolled Steel Coils UNS S30403 S31600 S31603

SUS316 stainless steel has good plasticity, toughness, cold denaturation and welding process performance. 316 has good high-temperature strength and 316L has slightly poor high-temperature performance, but its corrosion resistance is better than 316. Due to its low carbon content and 2% - 3% molybdenum, it improves the corrosion resistance to reducing salts and various inorganic acids, organic acids, alkalis and salts, as well as high-temperature strength.

Basic features:

1) Cold rolled products have good appearance gloss;

2) Due to the addition of Mo (2 ~ 3%), the corrosion resistance, especially pitting corrosion resistance, is excellent

3) Excellent high temperature strength

4) Excellent work hardening (weak magnetism after machining)

5) Non magnetic in solid solution state

6) Good welding performance. All standard welding methods can be used for welding. 316cb, 316L or 309cb stainless steel filler rods or electrodes can be used for welding according to the purpose. In order to obtain the best corrosion resistance, the welded section of 316 stainless steel needs post weld annealing. If 316L stainless steel is used, post weld annealing is not required.

Product introduction :

Chemical composition:

Mechanical property:

Gauge Size Table:

Brand Cross Reference Table:

Surface finish :

Packaging :

Product Display:

Stainless Steel Cold Rolled Steel Coils UNS S30403 S31600 S31603 packaging details :

1: Coils covered with waterproof protective packing materails ;
2: Then loaded in strong metal pallets +angle bar protection +steel strip ;
3: Well loaded and be transported to the loading port .

The innner size container as below :

1: 20ft GP: 5.8m(length) x 2.13m(width) x 2.18m(high) about 24-26CBM ;
2: 40ft GP: 11.8m(length) x 2.13m(width) x 2.18m(high) about 54CBM ;
3: 40ft HG: 11.8m(length) x 2.13m(width) x 2.72m(high) about 68CBM.

WHY CHOOSE US:

Q1: What is your terms of payment?
A: 30% T/T in advance, the balance 70% before delivery. We will show you the photos of products and package before you pay the balance.

Q2: what is the terms of delivery?
A: FOB, CIF, CFR,

Q3: What is the terms of packing?
A: generally, we pack our goods in bundles or coils with rods or belts, we could also pack the goods as the customers' requirement.

Q4: What is your delivery time?
A: For stocks, we could transport the goods to loading port within 7 days after we received your deposit.
For production period, it usually takes about 15 days-30 days after receiving the deposit.

Q5: Could you produce according to the samples?
A : Yes, we could customer-made by your samples or technique drawings, we could build the mold and fixtures.

Q6: Could you provide the samples?
A: yes, we could provide the free samples on conditons it is available in stocks, however, the the transportation fee is borne by buyer.