No.1 Finish 4x8 Stainless Steel Sheet 304 Hot Rolled ASTM Standard
Brand Name:TISCO,BAOSTEEL,POSCO,JISCO,LISCO
Certification:MTC; SGS
Minimum Order Quantity:1Ton
Delivery Time:3-15 working days
Payment Terms:L/C, T/T
Place of Origin:China
Contact Now
Add to Cart
Active Member
Address:
Room101, Entrance 1, Building2, No.95 National Highway 204,Chengyang District , Shandong Province, China
Supplier`s last login times:
within 42 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
4x8 Stainless Steel Sheet 304 Hot Rolled Plate No.1 Finish Customer Cut
Stainless acid-resistant steel is referred to as stainless steel. It is composed of stainless steel and acid-resistant steel. In short, steel that can resist atmospheric corrosion is called stainless steel, and steel that can resist chemical media corrosion is called acid-resistant steel. Rusty steel is a high-alloy steel with more than 60% iron as the matrix and adding alloying elements such as chromium, nickel, and molybdenum.
Product introduction:
| Commodity | 4x8 stainless steel sheet 304 hot rolled plate No.1 finish customer cut |
| Grade | 304 |
| Brand | TISCO ,BAOSTEEL,POSCO,JISCO,LISCO |
| Certification | SGS,BV,IQI,TUV,ISO,etc |
| Thickness | 3-120mm |
| Width | 1219,1500,2000mm or as per customers’ requirements |
| Length | 2000,3000,6000mm or as per customers’ requirements |
| Surface | No.1 |
| Standard | JIS,AISI,ASTM,GB,DIN |
| Delivery time | About 15 -30 days or based on the sales contract |
| MOQ | 1 Ton |
| Advantages | Showing the splendor of your quality, wear resistant as well , Strong corrosion resistance and decorative effect, durable and beautiful in good taste. |
Brand Cross Reference Table:
| GB NEW BRAND | JIS | ASTM | UNS | KS | BS EN | AS |
| 12Cr17Mn6Ni5N | SUS201 | 201 | S20100 | STS201 | 1.4372 | 201-2 |
| 12Cr18Mn9Ni5N | SUS202 | 202 | S20200 | STS202 | 1.4373 | - |
| 12Cr17Ni7 | SUS301 | 301 | S30100 | STS301 | 1.4319 | 301 |
| 06Cr19Ni10 | SUS304 | 304 | S30400 | STS304 | 1.4301 | 304 |
| 022Cr19Ni10 | SUS304L | 304L | S30403 | STS304L | 1.4306 | 304L |
| 06Cr19Ni10N | SUS304N1 | 304N | S30451 | STS304N1 | 1.4315 | 304N1 |
| 06Cr19Ni9NbN | SUS304N2 | XM21 | S30452 | STS304N2 | - | 304N2 |
| 022Cr19Ni10N | SUS304LN | 304LN | S30453 | STS304LN | - | 304LN |
| 10Cr18Ni12 | SUS305 | 305 | S30500 | STS305 | 1.4303 | 305 |
| 06Cr23Ni13 | SUS309S | 309S | S30908 | STS309S | 1.4833 | 309S |
| 06Cr25Ni20 | SUS310S | 310S | S31008 | STS310S | 1.4845 | 310S |
| 06Cr17Ni12Mo2 | SUS316 | 3016 | S31600 | STS316 | 1.4401 | 316 |
| 06Cr17Ni12Mo2Ti | SUS316Ti | 316Ti | S31635 | - | 1.4571 | 316Ti |
| 022Cr17Ni12Mo2 | SUS316L | 316L | S31603 | STS316L | 1.4404 | 316L |
| 06Cr17Ni12Mo2N | SUS316N | 316N | S31651 | STS316N | - | 316N |
| 022Cr17Ni13Mo2N | SUS316LN | 316LN | S31653 | STS316LN | 1.4429 | 316LN |
| 06Cr18Ni12Mo2Cu2 | SUS316J1 | - | - | STS316J1 | - | 316J1 |
| 022Cr18Ni14Mo2Cu2 | SUS316J1L | - | - | STS316J1L | - | - |
| 06Cr19Ni13Mo3 | SUS317 | 317 | S31700 | STS317 | - | 317 |
| 022Cr19Ni13Mo3 | SUS317L | 317L | S31703 | STS317L | 1.4438 | 317L |
| 06Cr18Ni11Tji | SUS321 | 321 | S32100 | STS321 | 1.4541 | 321 |
| 06Cr18Ni11Nb | SUS347 | 347 | S34700 | STS347 | 1.455 | 347 |
| 12Cr13 | SUS410 | 410 | S41000 | STS410 | 1.4006 | 410 |
| 20Cr13 | SUS420J1 | 420 | S42000 | STS420J1 | 1.4021 | 420 |
| 10Cr17 | SUS430 | 430 | S43000 | STS430 | 1.4016 | 430 |
Gauge and Inch:
| Gauge | Mild Steel | Aluminum | Galvanized Steel | Stainless Steel |
| 3 | 0.2391 | 0.2294 | 0.2500 | |
| 4 | 0.2242 | 0.2043 | 0.2344 | |
| 5 | 0.2092 | 0.1819 | 0.2187 | |
| 6 | 0.1943 | 0.1620 | 0.2031 | |
| 7 | 0.1793 | 0.1443 | 0.1875 | |
| 8 | 0.1644 | 0.1285 | 0.1680 | 0.1650 |
| 9 | 0.1495 | 0.1144 | 0.1532 | 0.1562 |
| 10 | 0.1345 | 0.1019 | 0.1382 | 0.1406 |
| 11 | 0.1196 | 0.0907 | 0.1233 | 0.1250 |
| 12 | 0.1046 | 0.0808 | 0.1084 | 0.1094 |
| 13 | 0.0897 | 0.0720 | 0.0934 | 0.0937 |
| 14 | 0.0747 | 0.0641 | 0.0785 | 0.0781 |
| 15 | 0.0673 | 0.0571 | 0.0710 | 0.0703 |
| 16 | 0.0598 | 0.0508 | 0.0635 | 0.0625 |
| 17 | 0.0538 | 0.0453 | 0.0575 | 0.0562 |
| 18 | 0.0478 | 0.0403 | 0.0516 | 0.0500 |
| 19 | 0.0418 | 0.0359 | 0.0456 | 0.0437 |
| 20 | 0.0359 | 0.0320 | 0.0396 | 0.0375 |
| 21 | 0.0329 | 0.0285 | 0.0366 | 0.0344 |
| 22 | 0.0299 | 0.0253 | 0.0336 | 0.0312 |
| 23 | 0.0269 | 0.0226 | 0.0306 | 0.0281 |
| 24 | 0.0239 | 0.0201 | 0.0276 | 0.0250 |
| 25 | 0.0209 | 0.0179 | 0.0247 | 0.0219 |
| 26 | 0.0179 | 0.0159 | 0.0217 | 0.0187 |
| 27 | 0.0164 | 0.0142 | 0.0202 | 0.0172 |
| 28 | 0.0149 | 0.0126 | 0.0187 | 0.0156 |
| 29 | 0.0135 | 0.0113 | 0.0172 | 0.0141 |
| 30 | 0.0120 | 0.0100 | 0.0157 | 0.0125 |
| 31 | 0.0105 | 0.0089 | 0.0142 | 0.0109 |
| 32 | 0.0097 | 0.0080 | 0.0134 | 0.0102 |
| 33 | 0.0090 | 0.0071 | 0.0094 | |
| 34 | 0.0082 | 0.0063 | 0.0086 | |
| 35 | 0.0075 | 0.0056 | 0.0078 | |
| 36 | 0.0067 | 0.0070 |
Chemical Composition:
| Grade | Chemical Composition (WT %) | ||||||
| Carbon | Manganese | Phosphorus | Sulfur | Silicon | Chromium | Nickel | |
| 304 | ≤ 0.07 | ≤ 2.00 | ≤ 0.045 | ≤ 0.030 | ≤ 1.00 | 18.0 to 20.0 | ≤ 8.0 to 10.0 |
Physical Property:
| Physical Property | |||||
| Tensile Strength(Mpa) | Yield Strength(Mpa) | Elongation(%) | / | Hardness(HV/HB) | Density |
| ≥520MPa | ≥205MPa | ≥40% | / | ≤200HV | 7.93g/cm3 |
When the chromium content in the steel exceeds 12%, the steel is not easy to corrode and rust in the air and dilute nitric acid. The reason is that chromium can form a very tight chromium oxide film on the surface of the steel, which effectively protects the steel from corrosion. The chromium content in stainless steel generally exceeds 14%, but stainless steel is not absolutely rust-free. In coastal areas or some places with serious air pollution, when the chlorine ion content in the air is high, the stainless steel surface exposed to the atmosphere may have some rust spots, but these rust spots are limited to the surface and will not erode the internal matrix of the stainless steel.
Surface Finish:
| Surface Finish | Definition | Application |
| 2B | Finished by heat treatment, pickling after cold rolling. Followed by skin pass line to be more brighter and smooth surface | General application Medical instruments, Tableware |
| BA | Bright heat treament after cold rolling | Kitchen utensil, kitchenware, architectural |
| 8K | A mirror-like reflective surface by polishing with finer abrasives over 800mesh | Construction, mirrors, plate sets, decoration elevators |
| HL | Finished by continuous linear polishing | Architectural purpose, Escalators, kitchenware, vehicles |
| NO.1 | Finished by hot rolling, annealing and picking, characterized by white pickled surface | Chemical industry Equipment, industrail tanks |
| NO.4 | Polishing with NO.150 to NO.180 mesh abrasives specified in JISR6001 | Kitchen utensils, Building Construction, Medical equipment |
Packing:
4x8 stainless steel sheet 304 hot rolled plate No.1 finish customer cut 2 types:
l Standard packing
l Fine packing
Factory and Machine Equipment:
We had our own factory to do slitting re-rolling and finish treatment machine,PVC and interleaving paper we will using with our machine for you,could protect stainless steel surface from damage or any scratches,
1. CNC Flame Cutting Machine
2. CNC Plasma Cutting Machine
3. CNC Laser Cutting Machine
4. Bending Machine
5. Shearing Machine
6. Punch Machine
7. Driving Machine
WHY CHOOSE US:
Q1: What is your terms of payment?
A: 30% T/T in advance, the balance 70% before delivery. We will
show you the photos of products and package before you pay the
balance.
Q2: what is the terms of delivery?
A: FOB, CIF, CFR,
Q3: What is the terms of packing?
A: generally, we pack our goods in bundles or coils with rods or
belts, we could also pack the goods as the customers' requirement.
Q4: What is your delivery time?
A: For stocks, we could transport the goods to loading port within
7 days after we received your deposit.
For production period, it usually takes about 15 days-30 days after
receiving the deposit.
Q5: Could you produce according to the samples?
A : Yes, we could customer-made by your samples or technique
drawings, we could build the mold and fixtures.
Q6: Could you provide the samples?
A: yes, we could provide the free samples on conditons it is
available in stocks, however, the the transportation fee is borne
by buyer.
No.1 Finish 4x8 Stainless Steel Sheet 304 Hot Rolled ASTM Standard
Inquiry Cart
0