Add to Cart
EP100 EP150 Rubber Oil Resistant Conveyor Belts
1. Specifications and models
1) According to the customer, it can be cut at will according to
the width;
2) According to the different use environments, it is divided into
ordinary conveyor belts and includes (ordinary type, heat-resistant
type, flame-retardant type, burn-resistant type, acid-base
resistant type, oil-resistant type), heat-resistant conveyor belt,
cold-resistant conveyor belt, and Acid-base conveyor belt,
oil-resistant conveyor belt, food conveyor belt and other models.
Among them, the minimum thickness of cover rubber on ordinary
conveyor belts and food conveyor belts is 3.0mm, and the minimum
thickness of lower cover rubber is 1.5mm; the minimum thickness of
cover rubber on heat-resistant conveyor belts, cold-resistant
conveyor belts, acid and alkali resistant conveyor belts, and
oil-resistant conveyor belts is 4.5 mm, the lower cover rubber
should be at least 2.0mm. According to the specific conditions of
the use environment, the thickness of the upper and lower cover
rubber can be increased by 1.5mm;
3) According to the tensile strength of the conveyor belt cloth
layer, it is divided into ordinary conveyor belts, green rubber
conveyor belts and powerful conveyor belts. Powerful canvas
conveyor belts are divided into nylon conveyor belts (NN conveyor
belts) and polyester conveyor belts (EP conveyor belts).
Supplementary note: The strong layer of the strong conveyor belt is polyester canvas (EP), which is divided into EP100, EP150, EP200, EP250, EP300, EP350, EP400, etc.; it can also be nylon canvas (NN) , Can be divided into NN100, NN150, NN200, NN250, NN300, NN350, NN400, NN450, NN500, etc.
2. Product introduction
1) Green rubber conveyor belt (including high-strength nylon
conveyor belt) products comply with the GB7984-2001 standard.
Covering layer: tensile strength not less than 15Mpa, elongation at
break
= The degree is not less than 350%, the abrasion amount is less
than or equal to 200mm3, the average value of the interlayer
adhesion strength of the longitudinal sample is not less than
3.2N/mm between the cloth layers, and the thickness between the
covering rubber and the cloth layer is not less than 2.1 N/mm. The
length ratio is not less than 10%, and the longitudinal reference
force elongation of the full thickness is not more than 1.5%
Nylon (NN) and polyester (EP) conveyor belts:
Covering layer: the tensile strength is not less than 15Mpa, the
elongation at break is not less than 350%, the wear amount is less
than or equal to 200mm3. The longitudinal elongation at break of
the full thickness of less than 3.2 N/mm is not less than 10%, and
the longitudinal reference force elongation of the full thickness
is not more than 4%.
2) Variety:
According to the different properties of the covering rubber, it
can be divided into ordinary type, heat-resistant type,
flame-retardant type, cold-resistant type, acid-base resistant
type, oil-resistant type, etc.
3) Specifications:
(1) Core material: CC-56, NN100, NN150, NN200, NN300, NN400
(2) Bandwidth: 100mm-2200mm
><
Variety | Standards and main indicators |
Ordinary steel cord conveyor belt | GB/T9770-2001 |
Flame-retardant steel cord conveyor belt | MT668-1997 |
General flame-retardant steel cord conveyor belt | MT668-1997 |
Heat-resistant steel cord conveyor belt | HG2297-92 |
Wear-resistant steel cord conveyor belt | Shaoboer wear amount ≤90mm 3 |
Acid, alkali and oil resistant steel cord conveyor belt | HG4-846 HG4-846 |
Cold-resistant steel cord conveyor belt | Brittleness temperature -40℃ |