RION Single Axis Mems Inertial Measurement Unit 0.01 Deg Angle Speed Sensor

Brand Name:RION
Certification:CE, ISO
Model Number:TL740D-485
Minimum Order Quantity:1
Delivery Time:7 days for samples
Payment Terms:T/T, Paypal
Contact Now

Add to Cart

Verified Supplier
Location: Shenzhen China
Address: 4th Floor Block 1, COFCO(FUAN) Robotics Industrial Park , Da Yang Road No. 90, Fuyong Distict, Shenzhen City, China
Supplier`s last login times: within 14 hours
Product Details Company Profile
Product Details

angle speed sensor single axis angle rate sensor price low drift angular sensor for AGV

Product Description

angle speed sensor single axis angle rate sensor price low drift angular sensor for AGV


TL740D is RION company newly developed horizontal azimuth angular sensor ,it can simultaneously output carrier's azimuth angle .The product inernal integrated RION's Patent , through the model of attitude angle data fusion , can solve the gyro short time drift problem as much as possible .

This product is specifically used for robotic cars, vehicle azimuth orientation, and other related applications of AGV., instead of the traditional robot vehicle magnetic bar guide shortcomings, no need at the site layout of magnetic stripe, is the necessary navigation components for the next generation of robot vehicle automatic tracing and driving.

Key Features

Azimuth angle output

Strong vibration resistance

Light weight

Long life,strong stability

Cost-effective

All solid state


Compact & light design

RS232/RS485 output optional

DC9~36V power supply



Application

AGV truck

Car Navigation

3D virtual reality

Platform stability

Auto safety system

Turck-mounted satellite antenna equipment

Industrial control
Robot

Parameters
TL740D
Mesuring range
Azimuth Angle (±180)
Acquisition bandwidth (Hz)
>100
Resolution(°)
0.01
Azimuth accuracy (°/min)
<0.1
Nonlinear
0.1% of FS
Max angle rate (°/s)
≥300
Starting time(s)
30(Static)
Input Voltage(V)
+9~36V
Current (mA)
60(12V)
Working Temp.(℃)
-40 ~ +85
Storage Temp(℃)
-40 ~ +85
Starting time(s)
30(Static)
Input Voltage(V)
+9~36V
Current (mA)
60(12V)
Working Temp.(℃)
-40 ~ +85
Storage Temp(℃)
-40 ~ +85
Vibration(g)
5g~10g
Impact(g)
200g pk,2ms,½sine
Working life
10 years
Output rate
5Hz,15Hz,25Hz,50Hz can set
Output signal
RS232 or RS485
MTBF
≥50000 hours /times
Insulation resistance
≥100 Megohm
Impact resistance
100g@11ms,3Times/Axis(half sinusoid)
Anti-vibration
10grms,10~1000Hz
Protecting
IP67
Connector
matched with 1m cable
Weight
160g(without cable)

Ordering information
TL740D-232
RS232 output mode
TL740D-485
RS485 output mode

2. The installation of the instrument should be kept parallel to the surface of the measured object, and reduce the influence of the dynamic and acceleration on the angle meter. Incorrect installation will lead to measurement errors, with particular attention to "surface" and" line "

1)The mounting surface of the instrument fixing must be close, smooth and stable with the measured surface. If the mounting surface is not smooth, the angle error of angle measurement can be caused easily. See figure Pic.AB

2)The axis of the instrument must be parallel to the axis of measurement, and the two axis should not be included angle as far as possible , see figure Pic.CD

3. Do not shake violently during the use of the product, avoid violent vibration, away from the vibration source (if you can not avoid please install the shock absorber), so as not to affect the product measurement accuracy;

4. Try to avoid a sharp acceleration, arrest, sharp turn angular velocity greater than 300 DEG /s movement during use, so as not to affect the measurement precision of products.

5. After the switch is started, the angular gyro sensor needs to be static 20S, and the initial value of the measuring unit is restored, so as to ensure the measurement precision of the product. If there is no such operation, the product can also be used normally, but can not reach the normal precision standard .

China RION Single Axis Mems Inertial Measurement Unit 0.01 Deg  Angle Speed Sensor supplier

RION Single Axis Mems Inertial Measurement Unit 0.01 Deg Angle Speed Sensor

Inquiry Cart 0