HCA796L-T LOW POWER CONSUMPTION INCLINOMETER IP67 RESOLUTION 0.001°

Brand Name:Rion
Certification:CE, ISO
Model Number:HCA796L
Minimum Order Quantity:1
Delivery Time:7 days for samples
Payment Terms:T/T,Paypal
Contact Now

Add to Cart

Verified Supplier
Location: Shenzhen China
Address: Block 1, COFCO(FUAN) Robotics Industrial Park , Da Yang Road No. 90, Fuyong Distict, Shenzhen City, China
Supplier`s last login times: within 14 hours
Product Details Company Profile
Product Details

HCA796L-T LOW POWER CONSUMPTION INCLINOMETER IP67 RESOLUTION 0.001°


GENERAL DESCRIPTION

HCA796L is a small-volume high-precision dual-axis inclinometer developed by RION Technology for industrial field control. It is professionally used in industrial engineering industries such as foundation pit tilt measurement, monitoring, and bridge inspection. Strong stability, high accuracy, excellent temperature drift performance, long-term stability is less than 0.01 degrees. At the same time, the roll angle and pitch angle of the sensor can be solved through the 5th order filtering algorithm and the compound calculation of the 3-axis gravity. Each product corrected by the error of the three-axis cross axis through a multi-sided turntable inside the factory to ensure that the product has the smallest influence between the measuring axes when the product is in a large range. The product has a built-in RS485 interface, and the interface integrates a protection circuit to ensure that it will not affect the 485 bus. The power supply also uses multi-level voltage regulation and overvoltage and overcurrent protection circuits. The product belongs to a real industrial grade product with reliable performance and good scalability, suitable for various harsh industrial control environments.


FEATURES

Dual axis measurement

Measure range ±90°

Size: 56×46×20.5mm

Resolution 0.001°

DC 6~15V wide voltage input

IP67 protection level

Direct lead interface

High vibration resistance> 100g

Wide temperature operation -40~+85℃



APPLICATION

Foundation pit tilt detection

Railway locomotive monitoring

Oil drilling equipment inspection

Bridge pier monitoring

Underground drilling rig attitude inspection

Application of shield jacking

Direction measurement based on dip angle

Geological equipment tilt monitoring

Various construction machinery inclination angle measurement


SPECIFICATIONS

HCA796L

CONDITION

PARAMETER

UNIT

Measure range

±15

±90

°


Measure axis

X Y

X Y

Axis


Resolution

0.001

0.001

°


Measure accuracy

@25℃

0.01

0.03

°(RMS)


Long term stability

<0.01

<0.01

°


Zero Temp.coefficient

-4085℃

0.0008

0.0008

°/℃


Sensitivity

temp. coefficient

-4085℃

≤0.01

≤0.01

%/℃


Power on time

0.5s


Response time

0.02s


Response frequency

>20HZ


Output signal

RS485


Communication protocol

MODBUS RTU protocol


EMC

According to EN61000 and GBT17626


MTBF

98000 hours/times


Insulation Resistance

≥100


Shockproof

100g@11ms,3 Axial Direction (Half Sinusoid)


Anti-vibration

10grms,101000Hz


Protection grade

IP67


Cables

Standard configuration: 1m length, wear-resistant, oil-proof ,wide temperature, shielded cable 4*0.4mm2


Weight

≤ 150g (including 1m cable)


MEASURING DIRECTIONS

The installation must guarantee the product bottom is parallel to measured face,and reduce the influence of dynamic and acceleration to the sensor. This product can be installed horizontally or mounted vertically , for installation please refer to the following scheme.

HCA796L-T LOW POWER CONSUMPTION INCLINOMETER  IP67 RESOLUTION 0.001°

PRODUCTION INSTALLATION NOTES

Please follow the correct way to install tilt sensor, incorrect installation can cause measurement errors, with particular attention to the "surface", "line"::1)The Sensor mounting surface and the measured surface must be fixed closely, smoothly, stability,if mounting surface uneven likely to cause the sensor to measure the angle error.

2) The sensor axis and the measured axis must be parallel ,the two axes do not produce the angle as much as possible.

HCA796L-T LOW POWER CONSUMPTION INCLINOMETER  IP67 RESOLUTION 0.001°

COMMUNICATION PROTOCOL

1. Protocol type: MODBUS protocol

Communication format: Format: 1 start bit, 8 data bits, no parity bit, 1 stop bit; the default baud rate is 9600.

Frame format:

HCA796L-T LOW POWER CONSUMPTION INCLINOMETER  IP67 RESOLUTION 0.001°




China HCA796L-T LOW POWER CONSUMPTION INCLINOMETER  IP67 RESOLUTION 0.001° supplier

HCA796L-T LOW POWER CONSUMPTION INCLINOMETER IP67 RESOLUTION 0.001°

Inquiry Cart 0