3/16'' Construction Wire Mesh 3m Concrete Block Mesh ASTM 580

3/16” Wire Diameter Length 3m concrete block work Construction Wire Mesh

Construction Wire Mesh Introduction:

Masonry reinforcement mesh, Ladder Mesh Reinforcement
Block work wire mesh, block welded wire mesh, block ladder mesh

Block truss mesh

Masonry reinforcement mesh, Ladder Mesh Reinforcement

Block work wire mesh, block welded wire mesh, block ladder mesh

It is widely used in the building construction area, normally used in the wall reinforcement.

There are several kinds are available:
1. Welded after hot dipped galvanized
2. Welded after electro galvanized
3. Welded before electro galvanized
4. Welded before hot dipped galvanized

We can produce around 5000 pieces per day, with best quality zinc coating - around 400GSM for welded after hot dipped galvanized type.

Packing: Every 20 pieces per carton box, one 40 feet container can loading around 22, 000 pieces ( 1100 boxes), more photos about the products and the packing is Available.

Size details: Normally 3 meters long, the space distance is 40cm, and with different Width 5cm, 10cm, 15cm, 20cm, 25cm.

Packing:
20 pieces/carton box

MATERIAL : Iron wire & stainless steel wire 304/316
Qijie metal joint reinforcement products conform to:
ASTM A951 (Standard Specification for Steel Wire for Masonry
Joint Reinforcement)
Our products pass the testing of ASTM A951,We tested in USA .
Tensile Strength - 80,000 p.s.i. | Yield Point - 70,000 p.s.i. minimum
Zinc Coating:
Mill Galvanized coating: (0.1 oz/ft²)
Hot-Dip Galvanized after fabrication: (1.5 oz/ft²)
Wire Diameter:
9 gauge or 3/16ӯ
Side Rods and Cross Rods available in any combination of the above.
Cross Rods welded 16” O.C.
Block Size: Standard Sizes: 4” wall - 16“ wall.
Other widths available on special request.

Masonry Block Wire Ladder has the continuous lengths of joint reinforcement that are embedded into the horizontal mortar joints of masonry walls. Joint reinforcement has long proven to be necessary for superior performance of masonry wall construction.

Variety: Truss-Mesh Reinforcement
Ladder-Mesh Reinforcement

Available at: hot dipped galvanized, electro galvanized or stainless steel

The specification :
The widht : 50mm,100mm,150mm,200mm,250mm etc.

Construction Wire Mesh Standard Specification:

* 4” wall - 16” wall
* Other widths available on special request
* (S) Standard: 9 ga. side rods x 9 ga. cross rods
* (EH) Extra Heavy: 3/16” side rods x 9 ga. cross rods
* (SHD) Super Heavy Duty: 3/16” side rods x 3/16” cross rods

*Tensile Strength - 80,000 psi
*Yield Point - 70,000 psi

Qijie's parent company Anping Shenghe Metal Wire Mesh MFG Co., Ltd was set up in 1999. It is located in Anping, which has a reputation of "home of wire mesh" in China. Qijie is particularly established for export by Shenghe. The company implements "one team, two brands" management system and development strategy! We are a leading enterprise in this line with a registered capital of 500,000 US dollars, covering 40,000 square meters, has 3 plant areas, 30 stainless steel woven mesh machines, 18 welded wire mesh machines, 8 cutting and flattening mesh machines, and 2 automatic PVC coating lines, with annual amount of more than $ 20 million. The main products are stainless steel insect mesh, fence panels, chain link fence, gabion baskets, woven screening mesh, welded wire mesh, expanded metal mesh, perforated metal and various wire products. Our main aim is to ensure customer satisfaction by providing superior quality products at reasonable prices. We use meticulous quality control procedures and analysis in order to ensure our products meet the international standards. A combination of competitive prices, on-time delivery and quality guarantee will make us our customer's best choice.