380V 3 Phase Induction Annealing Equipment Machine With Soft Switch 20KHZ

120KW Light Touch Screen Induction Annealing Equipment Soft Switch 5-20KHZ

12 advantages of the induction annealing equipment:

1. FAST HEATING The minimum rate of heating is less than 1 second (rate of heating is aviailable for adjustment and control).

2. WIDE COVERAGE OF HEATING It can be used to heat various metal parts ( replace removable induction coil as per different operating swithes.

3. EASY INSTALLATION It can be used once it is connected with power source, induction coil as well as water supply pipe and rising pipe; it is smal in size and light in weight.

4. EASY OPERATION You can learn to operate it within several minutes.

5. FAST START-UP It can be started to perform heating operation on condition that water and power supply is available.

6. LOW POWER CONSUMPTION As compared with conventional vacuum tube high frequency equipments, it can save the power by apporximately 70%. The smaller the size of the workpiece, the lower consumption would be.

7. HIGH EFFECTIVENESS It has such features as uniform heating( it is applicable to adjust the spacing of the induction coil to ensure the appropriate temperature as required by each part of workpiece), fast warming and limited oxic horizon, and can guard against any waste afer annealing.

8. COMPREHENSIVE PROTECTION It has such functions as overvoltage, over-current, overheat and water shortage alarm indications as well as automatic control and protection.

9. CONTROLLABLE TEMPREATURE Controllable temperature: it is applicable to control the temperature for heating workpiece as per the preset heating time, and thereby control the heating temperature at a certain technical point.

10. COMPREHENSIVE FULL LOAD DESIGN 100% full load design, it can work continuously 24 hours.

11. SMALL SIZE AND LIGHT WEIGHT Small area, saving workshop space, good working environment, environmental protection, engergy saving, safety, no noise, exhaust gas, dust and other emissions.

12. ELIMINATION OF HIGH VOLTAGE It requires no step-up transformer which may produce appoximately ten thousand voltage, and thus can ensure the maximum safety.

The paramerters of the lght touch screen induction annealing machine GYTS-120AB:

Application Range:

1. Heat treatment of metals: hardening, tempering, and annealing.

2. Heating prior to deformation: forging, swaging, upsetting, bending, and piercing.

3. Brazing and Soldering: brazing of steel, brass, and copper to each other in combination and aluminum to aluminum.

4. Shrink fitting: In any manufacturing process, for example, shrink fitting of motor rotors to shafts, shrink fitting of shell casings for compressors.

5. Coating: Of dissimilar metals, prior to insulation, and curing, such as paint.

6. Melting: Of all types of metals.

7. Other applications include crystal growing, cap sealing, sintering, carbon vapor deposition, levitation, exit axial deposition, and plasma generation.

The Advantages of Light Touch Screen Induction Heating Machine:

1. It has a sensitive reaction speed.

2. Light touch screen front panel switch are not easy to enter debris, dust, oil penetration; Also it is easy to clean and dustproof.

3. Personalized design, simple and beautiful appearance.

4. Reasonable internal structure design (Less internal lost; Light load; Accessories are not easy become hot)

Light Touch Screen Induction Heating Machine type Advantage for Forging and Quenching:

1. This equipment adopts advanced pulse density modulation power adjustment method, which controls the power size by adjusting the drive pulse generation density of the inverter power switch tube, referred to as PDM power adjustment.

2, The main advantage of PDM power modulation method: It is to ensure that the operating frequency of the equipment is basically unchanged through frequency tracking technology, and is synchronized with the network resonance frequency, so that the inverter always works in the resonance state, has a higher power factor, and can be achieved The power switch tube always works in the soft switching state, which greatly reduces the switching loss and reactive loss.

Welcome to GY

GY had developed many years of research and is committed to providing customers with all kinds of medium frequency, high frequency, super audio frequency,ultrahigh frequency induction heating equipment, and automation equipment. We provide solutions for project planning, development, design, manufacturing and comprehensive after-sales service according to your needs. One-stop solutions for customer heat treatmen tneeds.The lates tDSP+FPGA all-digital control system products provide more professional, more accurate solutions and personalized high-quality products for many users on the road of innovation, transformation and transformation break throughs.

From 1996, devoted

For more than 27 years, GY has always been adhering to the company philosophy of innovation, adherence to quality and excellent operation. A single R&D office researches a single product. After more than 20 years of hard work, it has developed steadily. The current equipment users cover many industries such as manufacturing, electric power and nuclear power,government science reform, university scientific research, and special military industry. In view of the different voltage levels
in some countries, the company has developed special input voltage induction heating equipment for different frequency parameters. For example, the input voltage suitable for use i n the United States, Japan and other countries is single-phase 110V, three-phase 110V, three-phase 220V, and three-phase 480V. Heating equipment and heating equipment with input voltage of three-phase 415V and three-phase 440V suitable for use in Southeast Asian countries such as Malaysia, Australia and Thailand Inheritance builds trust.

Inherit and build trust

Made in China is facing global competition and challenges. To find a suitable position in the international and domestic markets and open up a larger market, we must use more advanced technology and good after-sales service to improve ourselves. We will always be committed to the application and promotion of GY series products in the market with the spirit of pursuing professionalism, excellence and perseverance, and seek cooperation with suppliers, agents and users with professional technical support and good business collaboration. Common development and progress.

Founded in 1996, Guangyuan Technology (HK) Electronics Co., Ltd. is a private high-tech factory. Our factory is located in Wanjiang District of Dongguan City in Zhujiang Delta, with convenient transportation near No. 107 national highway and Guangshen speedway.

We have established an R&D system. It is supported by advanced engineers and professional workers, who are especially engaged in researching and developing the machinery of middle or high frequency induction heating and high frequency inverter electrolysis and galvanization power supply. Since we owned strong technique development capability, our factory has been insisting on producing new product and new craftwork to assure our leading position on technique in this field.

Under the effort of several years, our factory has produced series of high quality products in various categories. We can also exclusively produce these products on your requirement to meet you need. Our middle or high frequency induction heating equipment is produced for special voltage condition of some countries. For instance, there is single-phase 110V, three-phase 220V induction heating equipment for America and Japan and three-phase 415V, 440V induction heating equipment for such southwestern Asia countries as Malay and Thailand.

Our factory has a wholesome distribution network. Our products are delivered to America, Europe and southwestern Asia areas. We also built up a lot of offices to provide prompt and quick service to our consumers.

At the beginning of our foundation, we advocated "work with honest and credit, service for ever". This slogan has deeply footed in the culture of our factory, becoming the soul of development and management. During the process of development, it is firmly believed that a wonderful after-sale service is the base stone for a company's existing. Therefore, our factory takes the thought of "creating values for costumers" as the core of our managing strategies.

Chinese companies are facing the competition and challenge from the whole globe. Our factory will use advanced technology to provide better after-sale service and to find a proper position in the international market. We will hold the spirit of more professional, advanced and perseverant to pursue the wide application of our products in the market. We will also pursue the co-development and advancement with our suppliers and consumers relying on professional technology and good cooperation efforts.