1600mm Three Roll Rubber Calender Machine 3 Roll Calender Machine

Reducer&Electrical Components:

1. Motor&Electrical Components equiped with "SIEMENS" "MITSUBSHI" "CHINT",etc.

2.Famous brand PLC auto control,Safe, Seliable,Stable.

3. energy conservation,we have patent for this.

Equipment application and operation requirements

1.1 Main application: This machine is mainly used for curtain, canvas and other fabrics double sides continuous rubberizing.

1.2 Operation requirements A. running environment: altitude＜1000m,

temperature: 5℃-40℃, max. relative humility 95%

B. Power supply: AC415V/50Hz, 3-phase

C. Cooling water pressure: 0.2-0.4Mpa

Cooling water temperature: ﹤25℃±3℃

2 Main technical parameters

Roll diameter 550mm

Roll working length 1600mm

Middle roll linear speed 4-32m/min

Speed ratio of rolls 1:1.5:1.5:1

Max. nip range 10mm

Calendered product thickness 0.3-6mm

Max. calendered product width 1400mm

Main motor

Power 132/160kw

Speed 980RPM

Nip adjusting type motorized adjusting

Cooling water pressure 0.2-0.4Mpa

Overall dimensions(L*W*H) 6270*2960*4100mm

Approx. weight 22000kg

3 Supply range

Machine body (bedplate &frame) 1set

Roll &bearing 4sets

Nip adjusting device 3sets

Stock guide device 1set

Lubricating system 1set

Transmission system 1set

Roll temperature adjusting pipeline system 1set

Foundation bolts 1set

Electrical control system 1set

4 Following items prepared by end user

A. All wire cables outside operation box and electrical control cabinet.

B. All pipelines outside rotary joints.

5 Fabrication and technical standards

5.1 Frame: high strength cast iron through annealing treatment and completely processing via precision machining, with strong rigidity and good anti-vibration ability.

5.2 Bedplate: welded bedplate through annealing and processing, with a high rigidity and no deformation.

5.3 Roll and bearing

(1)Roll structure: hollow smooth roll, drilled rolls are optional.

(2)Material and fabrications: made of Ni, Cr and Mo alloy through centrifugal casting

(3)Hardness: HRC60-67

(4)Depth of hardening layer: 5-23mm

(5)Main bearing: anti-friction roller bearing

(6)Bearing support: casting parts through annealing process, with lubrication oil hole reserved.

(7)Roll temperature adjusting system adopts with high quality rotary joints and stainless steel hose.

5.4 Nip adjusting device

Nip adjusting is used for roll 1#, 2# and 4#, both single side adjusting and

double-side multiple adjusting are available.

5.5 Stock guide

Clearance adjusting is adopted with manual type.

5.6 Speed reducer

(1)Type: one motor input and single output shaft

(2)Lubrication: oil bath type

(3)Input coupling: flexible coupling

5.7 Rod pin couplin

Rod pin coupling is adopted to connect speed reducer output shaft and roll, which makes a reliable and smooth running while working, as well as an easy maintenance.

5.8 Lubrication system

(1)Bearing: there is an oil tank for this system, on which set with flow capacity adjusting, oil temperature gauge, cooler, filter and etc.

(2)Thin oil lubrication pipelines

5.9 Electrical control system

Complete and perfect control system meets with calender working requirements, this system is featuring of simple operation and reliable running.