Introduction:
1. Alloy Composition: 43%Ag, 32%Sn, 25%Cu.
2. No Zinc and No Gamma 2 Phase.
3. Conform to standard ISO24234: 2004.
Physical Properties:
1. 1 hr Compressive Strength > 90 MPa
2. 24 hrs Compressive Strength > 400 MPa
3. 24 hrs Volume Change (%) < +0.07
4. 7 days Static Creep (%) < 0.2
Package:
1/2 spill: 200mg (White);
1 spill: 400mg (Yellow);
2 spills: 600mg (Blue);
3 spills: 800mg (Red);
5 spills: 1200mg (Green).
50 pieces / box.
Operation:
1. Select appropriate package according to color coding.
2. Press down plunger end of the capsule and allow mercury enter
mixing chamber.
3. Carefully insert capsule in the clip arm of amalgamator and make
sure the capsule is securely positioned in the clip arms.
4. Select the appropriate vibration frequency and amalgamation time
(Recommendation: vibration frequency 4500~5500rpm, mixing
time10~15s).
5. After amalgamation has been completed, remove capsule from clip
and separate the capsule.
6. Empty contents and use amalgam immediately.
Precautionary notes:
1. Spillages. Mercury presents a health hazard if incorrectly
handled. Spillages of mercury should be removed immediately,
including from places which are difficult to access. Use a plastic
syringe to draw it up. Smaller quantities can be covered by sulfur
powder and removed. Avoid inhalation of the vapor.
2. Moisture contamination. If moisture is introduced into the
amalgam before it has set, properties such as strength and
corrosion resistance may be affected adversely. Whenever it is
possible, Use a dry field.
Warning:
Mercury:
Toxic by inhalation.
Danger of cumulative effects.
Corrosive to metals.
Waste material and all primary containers that hold mercury shall
be disposed of as hazardous waste.
Refer to safety data sheet.