Aluminum Rubber Warm Edge Butyl Spacer Bar For Double Glass Windows

1. Butyled Spacer bar is composed of aluminum strip, plastic heat insulation strip and aluminum foil,
the tensile strength is greatly improved, use one product to do the whole job instead of several components, such as aluminum
spacer bar, molecular sieve and so on, so the production speed is fast and saves much cost.
2. Polymer adhesives and tackifiers ensure perfect sealing performance.
3. The unique formula makes the properties of the sealing spacer not change according to temperature and humidity.
4. The high percentage of desiccant within the product completely absorbs the moisture in the air between the glasses, and its
strong drying capability ensures that there will be no condensation between insulated glasses even at -60℃.
5. Vacuum-packed with aluminum foil, with indicator card is available inside. The products are packed with composite vacuum foil
in four layers, and the indicator card shows the moisture-absorption performance.

Use Manufacturing building doors and windows,Train,Bus,insulating glass ,insulating door, shutter,Refrigeration equipment and so on. Using method and attention All the glass should be dry and clean. The insulating glass should be made by the following steps.
1. Putting the spacer onto the corner of one glass, then making the spacer straight, at the same time keeping the spacer around the surface of the glass, at the end, reserved 2.5mm– 3.0mm to the edge of the glass and the spacer should be reserved about 20mm more joint the pact pressing the joint, making no space in the circle.
2. Then putting another glass onto the one which has the spacer above, making sure the two pieces of glass are mutual alignment in both vertical and horizonal.
3. Putting them into the hot press machine with the temperature between 110–140Š inside and 50~60Šthe outlet.
4. According to the structure requirement of the insulating glass, two component silicone sealant could be putting outside of the spacer. Then a piece of insulating glass should come out.
5. The butyl spacer must be carried out in accordance with this attention otherwise may cause the seal leakage.

Q: Are you trading company or manufacturer ?

A: Yes we are Butyled Spacer bar factory.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods have stock. or it will takes 10-20 days to produce according you order quantity ,

Q: Do you provide Butyled Spacer bar samples ? is it free or extra ?

A: Yes, we could offer the Butyled Spacer bar sample for free, buyer afford the cost of freight.

Q: What is your terms of payment ?

A: LCL, 100% in advance. FCL 30% T/T in advance ,balance by copy of BL