Product Details
Rapid Start Electronic Ballast for One-lamp Operation
24V DC 5W ELECTRONIC BALLAST t5 fluorescent tube electronic ballast,electronic ballast t5 DC24V ,t5 fluorescent tube electronic ballast,electronic ballast t5 1x28 ,t5 fluorescent tube electronic ballast ,t5 8w ballast ,DC24V T5 electronic ballast 2x6w


l Technical specifications
Efficiency: >87%
Operating Frequency: 40-60KHz
Starting:Rapid
Dimensions:165*38*26mm
l Installation requirement
Wire Gauge:0.5-1.5mm2
Max.cable length between ballasts and lamp:1.5m
LED specification:VF=1.8-3.6V LF=20-50mA
l Mounting restrictions
Disconnect Input Power Before Installing or Servicing.
Don’t short any two wires of the four outputs.
l For applications with less than one switch-on cycle per day
(other otherwise preheat start ballasts are recommended)
Lamp filament must be suitable for instant start operation,ask lamp manufacturer.
l Features
Lamp status indication via DC signal output.
DC3~6V 5mA:lamp on. DC 0~2V:lamp fault or on lamp. Connect LED
l Applications
All areas of applications include Tanning UV lamps:
=>Air purification
=>Aquarium
=>Domestic drinking water




We can make customized products !!!
Specifications:
1.high frequency working status,fast start without flickering;
2.Low temperature rising, no noise, long life span,and fire resistant;
3.Could shut off automatically when the tube is time over,or woring in abnormal status,and it will restart change the tube;
4.Power:18W-40W;
5.Material:copper wire or aluminum wire;
6.Small size,light weight;
7.Low power consumption
 | Output parameters | PW11-425-40D24 |
Input voltage range | Max 48W |
Output current | 0.35A~0.42A |
Voltage | 1.6~26.4V |
Start time | ≤ 8mS |
24V |
Use environment | ta) - 20℃…+ 70℃ |
Installation case:
1.If the power of the ballast is less than the power of the lamp tube, the lamp emits less light, or even does not light up. 2.If the ballast power is greater than the lamp power, the lamp life will be reduced; the greater the power gap, the more life will be reduced. 3.In addition, the voltage of the ballast must match the power supply voltage.
Advantages:
Short circuit limiting power consumption: output short circuit, no danger, fault removed, relevant parameters meet the requirements of the letter of acceptance
1.9 open circuit limiting power consumption: the output is open circuit, without any danger, the fault is removed, and the relevant parameters meet the requirements of the acknowledgement
Light Source | Quartz Tube |
wavelength(nm) | 253.7 |
Rated Power | 200W |
Diameter | 15mm |
Base face length | 1100 |
Head material | ceramics |
Single head or double head | H shap |
The Eight Core Technologies
1.Core filament electronic power processing technology.
2.Use the best quality raw materials----Glass tube UV transmittance>93%. 3.Unique inner coating film and outer coating film technology.
4.Solid mercury----Homemade special mercury fixation to improve light efficiency.
5.Unique patented rapid leak detection technology
6.Unique wick anti-vibration patented technology .
7.The most advanced automated processing equiment in China.
8.Cost advantage and perfect pre-sales and after-sales service.
Ningbo UV Light & Electricity Co.,Ltd is a professional manufacturer of ultraviolet germicidal lamp and related products, integrating R&D, production, sales together. UV germicidal lamp is our main product, incuding sing-ended, double ended, U shape, H shape, amalgam UV lamps, etc.
Q: What's your advantage compared with other suppliers?
A: Our UV lamps are made with high-quality quartz.CE and Rohs certificates and competitive prices.
Q:What's my consideration when I choose one model of uv lamps?
A: Watts,Length,Volt and current about the electric ballast.
Q:What are the types of use of different UVC lamps?
A:Different uvc lamps can be used for water treatment,aquarium,medicial care, air purification and so on.
Q:What is the difference between normal and amalgam lamps?
A:Compared with the normal lamps, Amalgam lamp increase the ultravaiolet output efficiency by 2-3 times at the same length.and it also can stand above 70°C .
Q:How does the generated OZONE affect the health of people?
A:Excessive ozone can cause human organ failure.
Q:Can you accept the OEM or ODM?
A: Yes.
Company Profile
Ningbo UV Light & Electricity Co., Ltd, located in a beautiful
island called Daxie, is a manufacturer of personal care products
and high-end UV germicidal lamp in Ningbo, Zhejiang, China. As a
Joint-stock enterprise, we are capable in R&D, manufacturing
and sales. Xieguang Electronic Factory, the company’s predecessor,
was established as early as in 1986. And the successor, Ningbo UV
Light & Electricity Co., Ltd now has 30 years’ manufacturing
experiences of making UVC lamps and personal care products.

The factory covers an area of more than 30 mu and has over 160
employees. Our company
has its own certificates including ISO9001, CE, RoHS as well as the
certificates of sterilization effect, Hygiene license, explosion
proof, etc. The subsidiaries including Ningbo Yijiakang electrical
appliances Co., Ltd which focuses on personal care products and
health appliances with UV, and Ningbo Zhongrun water treatment
equipment Co., Ltd which products applied with UV are for water
treatment application, and Ningbo Youshiwei electronic Co., Ltd
which makes research and development on supporting electronic
products. The UV germicidal lamp series of our company is wildly
used in the water treatment system, air purification system and
health appliance, etc. Ningbo UV Light & Electricity Co., Ltd
is the representative company of personal care products and
high-quality product in UV germicidal lamp domestic industry.

Now, company has three production bases of UV germicidal lamp in
Ningbo, Zhejiang, Fuoshan, Guangdong and Lianyungang, Jiangsu. And
in Foshan, Guangdong, there is a supporting production base of
electronic ballast, the annual output of UV germicidal lamps and
supporting ballasts can reach more than 5 million. The key
materials of the UV germicidal lamps are imported, and the
clip-sealing machine for the lamp making and high-vacuum-exhaust
equipment are tailor-made. What's more, it has established an
industry-university-research laboratory with domestic
electric-light-source institutions of higher education to improve
quality through continuous process innovation and improvement. The
company carries out strict quality control of every product and
strives to deliver perfect products to customers.

As to the quality management, the company has established quality
management system and passed a series of certifications such as
ISO9001, ISO14000, CE, and UL. It is the great effort that makes
the company's development more formal and international step by
step. With strong production and R&D ability, the factory is
now an enterprise of diversified development with strict and
completed factory management, own brand as well as the ability to
design and develop new products and provide OEM services for the
customers. And our pursuit for the customer always are on-time
delivery, qualified and cost-effective products.

Our main products include personal care products and UV lamps,like
hair remover,massage pad, tooth cleaner, face beauty
instruments,uvc light,double-ended straight tubes, one-ended
straight tubes, one-ended H tubes, high-power water treatment
lamps, code cathode lamps, electronic ballasts, sewage treatment
equipment and other diversified products that can meet the needs of
different customers.