Home /Batteries /

2V 600Ah Lead Acid Batteries UPS Sealed Valve Regulated Lead Acid Gel Battery

2V 600Ah Lead Acid Batteries UPS Sealed Valve Regulated Lead Acid Gel Battery

Brand Name:LIRUISI
Model Number:LT-600
Minimum Order Quantity:1 set
Delivery Time:8 working days
Payment Terms:L/C, D/A, D/P, T/T, Western Union, MoneyGram
Place of Origin:China
Contact Now

Add to Cart

Verified Supplier
Location: Shenzhen Guangdong China
Address: Liruisi Industrial Park, No. 56 Fengtang Avenue, Shajing, Bao'an District, Shenzhen, Guangdong Province, China
Supplier`s last login times: within 8 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details Company Profile
Product Details

LIRUISI Communication Battery 2V 600Ah Valve Regulated Sealed Lead-Acid Battery LT-600


Product introduction:

Good charging resistance: 25 degrees Celsius, fully charged battery 0.1CA charge for 48 hours, no leakage, no battery expansion and rupture, open circuit voltage is normal, capacity maintained above 95%.


LT series 2V valve regulated sealed lead-acid battery series product specifications:

Modelstandard voltagecapacity(Ah)size(mm)
10HR10HRLength (L)Width (W)High (H)THWeight (kg)
LT-600260039030130132836546.5

Installation, use and maintenance


Precautions:

Regularly (once every three months) wipe the battery with a soft fabric to keep the battery clean


Battery charging:

1. Float charge (limit voltage, control current) use: charging voltage 2.275-2.30V/single cell, temperature compensation, temperature compensation coefficient per unit is 3mv (based on 20)

2. When trickle is used, the battery float charge current is high speed to less than 2Ma/Ah

3. Cycle use (full and stop, discharge and charge): charging voltage 2.35-2.45V/single cell

4. The maximum current shall not exceed 25% of the nominal capacity

Note: The battery should not be used in a closed or high temperature environment and should be kept away from fire


Storage and Installation:

1. The battery that is not in use should be removed from the connecting cable, covered with the pole sheath and wiped clean

2. Maintain and charge the battery every three months, the charging method is the current limiting and constant voltage method, the initial charging current is 0.1CA, and the charging voltage is 2.4V/single cell


Connection of batteries:

The batteries of the battery pack should be spaced more than 10mm apart to facilitate heat dissipation

China 2V 600Ah Lead Acid Batteries UPS Sealed Valve Regulated Lead Acid Gel Battery supplier

2V 600Ah Lead Acid Batteries UPS Sealed Valve Regulated Lead Acid Gel Battery

Inquiry Cart 0