VMQ High Strength Molded Silicone Rubber 700% Elongation for Cable Accessories
Brand Name:CHENGUANG FSP
Certification:ISO
Model Number:GX155-U
Place of Origin:China
Product Name:High-strength molded Silicone Rubber
Density:1.15g/cm3
Contact Now
Add to Cart
Verified Supplier
Location:
Chengdu China
Address:
Room 1920 Building 4, Jianfa Fortune Plaza, 191 Tongyi St., Qingyang District, Chengdu, China
Supplier`s last login times:
within 41 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Silicone Rubber for Molding(For Food Use)
DESCRIPTION
High Temperature Vulcanizable, Peroxide Initiation Curing
CHARACTERISTICS
- Transparency
- Excellent electrical insulation properties
- Good physical and mechanical properties
- High and low temperature resistance
APPLICATION
Molded products and die-casting products, such as cable
accessories, gaskets, gaskets, 0 rings, diaphragms, rubber rollers,
plates, etc.
TYPICAL PROPERTIES
| Properties | Test Method | Unit | Parameters |
Density, 25℃ | GB/T 1033-86 | g/cm3 | 1.15 |
Tensile Strength | GB/T 528-1992 | MPa | 9.0 |
Elongation at Break | GB/T 528-1992 | % | 700 |
Tension Set at Break | GB/T 528-1992 | % | 4.0 |
Tear Strength | GB/T 529-1991 | kN/m | 35.0 |
Hardness, Shore A | GB/T 531-1992 | 55±2 | |
Volume Resistivity | GB/T 1410-1989 | Ω.cm | 1.0×1015 |
Dielectric Strength | GB/T 1408.1-1999 | kV/mm | 22.0 |
Dielectric Constant,1MHz | GB/T 1694-1981 | 3.5 | |
Dissipation Factor,1MHz | GB/T 1694-1981 | 5.0×10-3 |
- These figures are only intended as a guide and should not be used in preparing specifications.
HOW TO USE
Blend the peroxide curing agent—DBPH50 into rubber base with open
mill, the mixed rubber can be used for mold after re-milling
homogeneous. Base on sample size to decide mold condition.
Base on customer request, curing agent and mix pigment can be added
before ship.
PACKING, STORAGE & SHIPPING
GX151-Uhas a shelf life of 6 months at least from the date of
production if stored at 25℃ or below. Storage time beyond the
specified data does not mean that the product is no longer usable.
In which case, the properties test for the intended use must be
carried out after re-milling for quality assurance reasons. If the
curing agent has been add when shipped, best using time is within
15 days.
The inner package of GX155-U is polyethylene plastic bags and outer
package is carton, per case of 20Kg net weight.
There is no shipping limitation for GX155-U.
LIMITED WARRANTY INFORMATION
The data presented in this leaflet are in accordance with the
present state of our knowledge, but do not absolve the user from
carefully checking all supplies immediately on receipt. We reserve
the right to alter product constants within the scope of technical
progress or new developments.
The recommendations made in this leaflet should be checked by
preliminary trials because of conditions during processing over
which we have no control, especially where other companies’ raw
materials are also being used. The recommendations do not absolve
the user from the obligation of investigating the possibility of
infringement of third parties’ right and, if necessary, clarifying
the position, recommendations for
use do not constitute a warranty, either express or implied, of the
fitness or suitability of the products for a particular purpose.
VMQ High Strength Molded Silicone Rubber 700% Elongation for Cable Accessories
Inquiry Cart
0