Add to Cart
Introduction:
Monel K500 wire is an alloy material widely used in the marine
industry. It is a nickel-copper alloy that has excellent corrosion
resistance and mechanical properties and is therefore widely used
in a variety of applications in marine environments.
First, Monel K500 wire has excellent corrosion resistance. In the
marine environment, metal materials are easily corroded by
seawater, salt spray, humid climate and marine life. Monel K500
wire can resist the erosion of these corrosive media, maintain its
stable performance and extend its service life. It has high
resistance to seawater corrosion, sea salt corrosion and marine
biological corrosion.
Secondly, Monel K500 wire also has excellent mechanical properties.
It has high strength and excellent plasticity, and can withstand
the stress and vibration generated in the marine environment. This
makes it an ideal material for manufacturing equipment and
components in the marine industry, such as offshore platform
structures, ship parts, subsea pipelines and valves.
In addition, Monel K500 wire also has good anti-wear and abrasion
resistance. In the marine industry, sand and particles in seawater
can cause abrasion on material surfaces. Monel K500 wire resists
this wear, maintaining its surface integrity and performance,
reducing the need for maintenance and replacement.
Finally, Monel K500 wire also has excellent performance under high
temperature and pressure conditions. In some applications in the
marine industry, such as deep sea mining and oil and gas
exploration, extreme temperatures and pressures are encountered.
Monel K500 wire can maintain its stable performance in these harsh
environments and is not easily deformed or failed, ensuring the
reliability and safety of the equipment.
Parameter:
Chemical composition:
Nickel (Ni): about 63%
Copper (Cu): about 29.5%
Aluminum (Al): about 2.7%
Titanium (Ti): about 0.6%
Iron (Fe): about 2%
Manganese (Mn): about 1.5%
Silicon (Si): about 0.5%
Carbon (C): up to 0.25%
Physical properties:
Density: about 8.05g/cubic centimeter
Melting point: about 1288-1343 degrees Celsius
Thermal Conductivity: Approximately 17.2 Watts/meter-Kelvin
Linear expansion coefficient: approximately 13.9 x 10^-6 degrees
Celsius^-1 (room temperature to 100 degrees Celsius)
Mechanical behavior:
Yield Strength (Tensile Strength): Minimum approximately 790 MPa
(80,000 psi)
Tensile Strength: Minimum approximately 1100 MPa (110,000 psi)
Elongation: minimum value is about 20%
Item | Ni | Cu | Al | Ti | Fe | Mn | S | C | Si |
Monel K500 | ≥63 | 27-33 | 2.3-3.15 | 0.35-0.85 | ≤2 | ≤1.5 | ≤0.01 | ≤0.25 | ≤0.5 |
Item | Density | Melting point | Tensile Strength | Yield Strength | Elongation |
Monel K500 | 8.05 g/cm3 | 1288-1343℃ | 1100 | 790 | 20% |
Monel K500 | Bar/Rod | Forging | Pipe | Sheet/Strip | Welding Wire |
Standard | ASTM B864 | AMS4676 | ASTM B865 | ASTM B564 | ErNiCu-7 |
|
Advantage:
Application:
In the marine industry, specific applications of Monel K500 alloy wire include but are not limited to the following:
It should be noted that the specific parameters and specifications
will vary depending on the needs of the actual application and the
requirements of the specific project. When selecting and applying
Monel K500 alloy wire, it is recommended to refer to the detailed
technical data and specification sheets provided by the relevant
material manufacturer to ensure that the alloy wire selected and
applied meets the project needs and standards.
contact us
email:victory@dlx-alloy.com
Oem service:
Welcome customized size
We are experience factory for OEM&ODM service
Q & A:
Q: What are the applications of Monel K500 wire?
A: Monel K500 wire is extensively used in marine engineering, oil
and gas extraction, chemical equipment, and more.
Q: Why is Monel K500 wire favored in these applications?
A: Monel K500 wire offers excellent corrosion resistance, high
strength, and good mechanical properties.