Type 1 EV Charger 40A Charging Station 9.6KW Wallbox Level2 Electric Vehicle Charger With LCD Screen
Brand Name:MINKO
Certification:FCC, ETL, Energy Star
Model Number:Wallbox-I40
Minimum Order Quantity:5 pieces
Delivery Time:8 -10 working days
Payment Terms:T/T, Western Union, MoneyGram,Paypal,Skrill,Transferwise
Contact Now
Add to Cart
Verified Supplier
Address:
309 West Lake Industrial Zone, Cuishan Road, Dongxiao Street, Luohu District, SZ
Supplier`s last login times:
within 1 hours
Shipping
lt's easy to get a shipping quote! Just click the button below and complete the short form.
Get Shipping Quote
Product Details
Company Profile
Product Details
Type 1 EV Charger 40A Charging Station 9.6KW Wallbox Level2
Electric Vehicle Charger with LCD Screen
Description of Type1 Wallbox EV Charger
This product is mainly composed of charging station host, charging
gun, wire, installation
backplane, installation ingredients package, etc. It is a household
electric vehicle charging
equipment. The AC charging station is connected to the mains, the
electric vehicle will be
safely and reliably charged by the charging gun interface; to avoid
affffecting the product
performance, should no acid and alkali and other corrosive gases in
the surrounding; try to
avoid direct rain or use in environments with high humidity, and
should try to prevent damage
from impacting the housing.
Product parameter description:
| Model | I40 | I48 |
| Input / Output Voltage | AC 110~240V / Single phase | AC 110~240V / Single phase |
| Input / Output Current | 8, 10, 12, 14, 16A, 20, 24,28, 32A, 36A, 40Aadjustable | 8, 10, 12, 14, 16A , 20, 24,28, 32A, 36A, 40A, 44A, 48Aadjustable |
| Max Output Power | 9.6 KW | 11.52 KW |
| Frequency | 50/60Hz | |
| Input Cable | NEMA 14-50P / 1M, hard-wired | 1M, hard-wired |
| Charging Plug | SAE J1772 (Type1) | |
Length | 7.4M | |
| Withstand Voltage | 2000V | |
| Work Altitude | <2000M | |
| Stand by | <3W | |
Operating temperature | -35°C to 50°C | |
Start method | Card, WIFI, Bluetooth APP a variety of options to start charging | |
Protection | over voltage protection, over load protection, over-temp protection, under voltage protection, earth leakage protection, lightning protection, short circuit protection | |
| IP level | IP65 | |
| Touch Button | Yes | |
| LCD Screen | Yes | |
| Current Adjustment | Yes | |
| Bluetooth APP charging | Yes / No | |
| WiFi APP charging | Yes / No | |
| RFID | Yes | |
| Timing / Appointment | Yes / No | |
| Certification | FCC, ETL, Energy Star | |
Warranty | 1 Year for the whole machine | |
Feature of Wallbox Charger Station with LCD Screen
1. The product complies with the Low Voltage Directive 2014/35/EU,
IEC61851-1:2019
2.IP65, weatherproof; leakage protection; impact resistance
3. Charging status and working error are simply displayed by LED
indicator light and LCD screen
4. Optional unction of current selection button,
5. 8A-48A free switching current
Card, WIFI, Bluetooth a variety of options to start charging
Function introduction of Type1 Wallbox EV Charger
1.Residual current detection (RCD)
Ac leakage protection automatically detects the AC mismatch between
the power supply wires,
which indicates that the current flflows through the grounded (PE)
wire. Ac residual current fault
protection will trip when the current is 30 Ma.
2.Surge protector
In: 3kA, lmax:6kA
3.Leakage protection
When the leakage protection is started, it needs to be cut offff
the power outage and restart.
4.Overcurrent protection
When the current exceeds the early warning value,the charging pile
cuts offff the power output, restarts
automatically after 10 seconds, and does not recover automatically
after 3 cycles until you cut of the
power and restart.
5.Overvoltage protection
The protection starts when the voltage exceeds 275V, and
automatically recovers when the voltage
is restored and stabilized.
6.Undervoltage protection
Start the protection when the voltage is less than 100V, and
restore automatically when the voltage
is restored and stabilized.
7.Overtemperature protection
Start the protection when the internal temperature of the EV
charging station exceeds 85 °C.
Installation Procedure:
1. Please use a percussion drill to drill holes according to the
cardboard positioning
2. Install expansion bolts(6*M6*60MM)
3. fix the Mounting backplane with self=tapping screws(6*M5*50mm)
4. Align the main unit with the buckle on the back panel and
install it, and then use screw
to fix(4*M5*40)
Instructions
1. When the machine is on standby normally, the indicator light is
fixed blue.
2. Remove the charging gun from the holder, insert the charging gun
into the car charging socket.
3. After the gun insertion completed, the vehicle automatically
starts to charge normally, and the blue meteor light on.
4. The indicator light always turns blue after the charge is
completed.
Type 1 EV Charger 40A Charging Station 9.6KW Wallbox Level2 Electric Vehicle Charger With LCD Screen
Inquiry Cart
0