Medical Clinic Diagnostic Equipment Blood Pressure Monitor Aneroid Sphygmomanometer

Features of Aneroid Sphygmomanometer:

Pressure indication range: 0~300 mmHg

Accuracy of cuff pressure display: ±3mmHg

Applicable arm circumference: approximately 23 to 32 cm

Operating Environment: +15℃to+25℃, 85%relative humidity or below

Storage Environment: -20℃to+70℃, 85% relative humidity or below

Service lifetime: more than 20000 time measurement

Operating Procedure:

Before taking your blood pressure, plan to relax and have a rest.

Do not take your blood pressure after physical exercising.

Do not repeat measurements in a short time or measure for long time.

1Position the pressure cuff

The cuff should be placed on the upper arm so that the lower edge is 2-3cm above bend of the elbow. The label on the cuff must be placed on the artery. You can perform the measurement either sitting or lying down. Always make sure that the cuff is on a level with your heart. Turn the cuff so that the stethoscope diaphragm (sound head) is on fire inside of the arm just above the elbow.

2Inflate the cuff

Insert the earpieces of the stethoscope and close the valve on the bulb Inflate the cuff by repeatedly squeezing the bulb with your right hand. Listen to the pulse beat whilst inflating the cuff. Watch the gauge, when you can no longer hear the pulse beat, raise the pressure an additional 30mmHg.

3Slowly deflate the cuff

Slowly open the valve by turning counter clockwise so that the pressure drops 2-3mmHg with each beat of your heart.

4Systolic pressure

After opening the valve, listen carefully for a pulse beat and watch the needle. The moment you hear the first pulse beat, please note the reading (mmHg) on the gauge. This is your systolic (upper) blood pressure.

5 Diastolic pressure

Allow the pressure to continue dropping. At the exact point when you can no longer hear the pulse beat, read tile gauge, this is your diastolic (lower) blood pressure reading.

Fully open the valve

As a a professional supplier of medical consumable, EasierWay Medical Group has start since 2002 in China. We are dedicated to providing one-stop solution for customers with more than 20 years experience. Combining the manufacture, research & development and distribution of medical consumables and lab disposables into one entity. Products approve by CE,ISO and FDA.

Main products including syringes and needles, cottons, gauze rolls, catheters and tubes, masks, non woven products and many other medical disposables.

Factory located in Jiangsu province, which is the most important zones of medical industry in China. Also we are near Shanghai port which is easy to handling the shipment. It helps us not only save the transportation cost but also saving time to win a best delivery time for all customers.