Socket Raised Face Weld Neck Flange , Class 300 Carbon Steel SW RF Flange

ASTM A105N ANSI B16.5 SW RF Class 300 Carbon Steel Socket Weld Raised Face Flange

Product Information

ASTM A105/A105N

ASTM A105 flanges are forged carbon steel flanges for ambient- and higher-temperature service in pressure systems. These flanges may be manufactured in accordance with a variety of standard specifications covering ASME B16.5, ASME B16.47, ASME B16.48, ASME B16.36, MSS SP 44, API 605, and API 6A, etc. Flanges made to ASTM A105 material are limited a maximum weight of 4540 kg.

ASTM A105 and A105N steel flanges are not same, they have same raw materials, same steel grades, but different heat treatment requirement. N means Normalization heat treatment, and A105 flange haves no heat treatment requirement. In summary, the ASTM A105 flange and ASTM A105N flange have a same chemical composition, but the A105N have a better mechanical property and usually used in critical situation.

ASTM A105 Chemical Composition (%)

ASTM A105 Mechanical Properties

Flange Type:Weld Neck Flange (WN)

Socket Weld flanges were initially developed for use on small-size high pressure piping. Their static strength is equal to Slip On flanges, but their fatigue strength 50% greater than double-welded Slip On flanges.

The connection with the pipe is done with 1 fillet weld, at the outside of the flange. But before welding, a space must be created between flange or fitting and pipe.

ASME B31.1 1998 127.3 Preparation for Welding (E) Socket Weld Assembly says..
In assembly of the joint before welding, the pipe or tube shall be inserted into the socket to the maximum depth and then withdrawn approximately 1/16" (1.6 mm) away from contact between the end of the pipe and the shoulder of the socket.

The purpose for the bottoming clearance in a Socket Weld is usually to reduce the residual stress at the root of the weld that could occur during solidification of the weld metal. The image shows you the X measure for the expansion gap.

1. Socket Wedl Flange 2. Filled Weld 3. Pipe X=Expansion gap

Face Type: Raised Face (RF)

The Raised Face flange is the most common type used in process plant applications, and is easily to identify. It is referred to as a raised face because the gasket surfaces are raised above the bolting circle face. This face type allows the use of a wide combination of gasket designs, including flat ring sheet types and metallic composites such as spiral wound and double jacketed types.

The purpose of a RF flange is to concentrate more pressure on a smaller gasket area and thereby increase the pressure containment capability of the joint. Diameter and height are in ASME B16.5 defined, by pressure class and diameter. Pressure rating of the flange determines the height of the raised face.

ANSI B16.5 Flange Dimensions - Class 300 (mm)

Kasugai Shanghai, a subsidiary of Kasugai Group headquartered in Osaka, Japan, was established in 2003 as a representative office in Shanghai, China, and was upgraded to a company in 2008. Kasugai Shanghai serves as an important force of Kasugai Group in Asia, and over the past 20 years, it has become a key player in the industrial pipes, fittings, flanges, and valves market.

Kasugai Shanghai leverages the resources and manufacturing capabilities of local suppliers in China to provide a wide range of products, including stainless steel, carbon steel, duplex/super duplex steel, alloy steel, nickel alloy, and titanium alloy, according to various international standards such as ASTM/ASME/ANSI, JIS, EN, and DIN. The company also has a local support team and an on-site quality inspection team to ensure that products meet the specifications and quality requirements of customers.

With the support of high-quality local suppliers and a strong commitment to customer satisfaction, Kasugai Shanghai strives to provide reliable products and services to customers in Asia and beyond. Kasugai Group's establishment of Kasugai Shanghai and other international operations demonstrates their proactive approach to globalization and their commitment to meeting the needs of customers in a rapidly changing global market.

Kasugai Group Company Profile:

Foundation : June, 1925

Legal Representative : Akinori Kasugai

Number of employees : 140 persons (150 persons including employees of the affiliates) As of March 21, 2023

Scope of business : wholesaler and trade firm of industrial pipe/tube, fittings, flanges and valves

Kasugai Group Locations:

Head Office

4-14-2 Shinmachi, Nishi-ku, Osaka 5500013, Japan

TEL: 81-6-6538-7281

FAX: 81-6-6538-2273

E-MAIL: contact@kasugai-group.co.jp

Shanghai

Rm. A8415 Building A8, No. 808 Hongqiao Road, Xuhui District, Shanghai 200030, China.

TEL: 86-21-6447-1967

FAX: 86-21 6447-7841

E-MAIL: zhanghb@kasugai-group-co.jp

Other Branch Offices and Joint Ventures:

Fukuoka, Kitakyushu, Tokai, Kyoto, Shunan, Tokyo, USA (Watchung, N.J.), Jiangyin (Jiangsu, China)

Our Strengths:

Since our foundation in 1925, we have continuously taken steps to further grow our businesses. Global capabilities, professionalism, and trust. These three strengths are the reason that customers continue to choose Kasugai, regardless of the period.

-Global capabilities

We embarked on overseas procurement ahead of our competitors in the industry and have established a supplier network that can meet a variety of market demands. We are successfully chosen by many overseas customers
as a global procurement partner.

- Professionalism

Leveraging expertise cultivated over many years, we deliver optimal products to the optimal place at the optimal time. Our excellent information gathering and problem-solving abilities are also invaluable for solving customer issues.

- Trust

We provide smooth, prompt services by cultivating solid relationships of trust with suppliers. We believe that building stronger partnerships is the source of our growth.