2.4Kw Horizontal Multistage Centrifugal Pump 50Hz Light CHL / CHLK Pumps

CHL, CHLK, CHLF (F) 50Hz Light Horizontal Multistage Centrifugal Pump

Application

CHL, CHLK, and CHLF (T) pumps are mainly used in industry:

air conditioning system

Cooling system

Industrial cleaning

Water treatment (purification of water)

Aquaculture

Fertilization/metering system

(Other) Many specialized and specific purposes

Conveying liquids

Thin,clean,non flammable and explosive liquids without particles or fibers.

Pumps can transport light chemical media such as mineral water, softened water, pure water, clear oil, and others.

When the density or viscosity of the conveyed liquid is greater than that of water or water, a high-power motor must be used.

The suitability of a pump for a specific liquid is determined by various factors, the most important of which are chlorine content, pH value, temperature and solvent, oil content, etc.

Operating Conditions

Liquid temperature: room temperature type -15 ° C to+70 ° C

Hot water type -15 ° C to+105 ° C

Maximum ambient temperature:+40 ° C

Maximum operating pressure: 10 bar

The maximum inlet pressure is limited by the maximum operating pressure

Curve conditions

The following conditions apply to the performance curve shown later.

All curves are based on the measured values of the motor at a constant speed of 2900rpm.

The curve tolerance complies with ISO9906:2012, Grade 3B.

The test uses water without air at 20 ^.C, with a kinematic viscosity of 1.

The use of pumps should refer to the performance range of the bold curve to prevent overheating caused by low flow and motor overload caused by excessive flow.

Model Meaning

CHL example

Motor

The motor is a fully enclosed, air-cooled secondary motor.

protection grade:IP55

Insulation level: F

Standard voltage:50Hz 1X220-240V

3X220-240V/380V-415V

The maximum power of a single-phase motor is 2.4Kw.

Pump

Horizontal multi-stage non self priming centrifugal pump with extended shaft motor.

The compact structure makes the pump size very small, with axial inlet and radial outlet.

MEI-AL Technology has been committed to serve the aluminum profile surface treatment industry with its strong technical force, excellent production and processing, scientific management methods and excellent management style. Mei-al main production: anodizing, coloring, electrophoresis production line, products have special high-power silicon control rectifier, high-power high-frequency switching power equipment, electrophoresis workshop pure water equipment(RO machines), refining equipment, electrophoretic paint recovery equipment, electrophoresis curing furnace,loading and unloading machines,1T+1T professional anodizing cranes, anodizing tank temperature control system and production line automatic control system, etc.

In our perpetual effort and support of our partners in the industry,MEI-AL Technology has obtained outstanding achievements and is still maintaining a rapid development speed.With the operation spirit of “Professional, Concebtration, Integrity, Co-win”, MEI-AL Technology will provide with you excellent products and perfect services, in the rooted concept of Growind Up with You !