Circle 316L Demister Mesh Pad Scrubber Mist Eliminator ISO9001

316L material Wire Mesh Demister

1.General introduction of wire mesh demister

There are many types of mesh pad demisters, including flat type, oblique type, etc.. Usually the mesh pad thickness for flat type demister is 100mm or 150mm. With simple structure, it suits for low velocity, low mist rate gas flow. Re-entrainment easily happen when the gas velocity is too high. While the oblique type (sometimes also shown as wave shape demister) has flow guiding effect on the captured liquid droplet, leaving less liquid droplets on the downside of the mesh pad. So the oblique type demister has less resistance to the passing gas flow, and is a little harder to cause re-entrainment. It allows somehow higher velocity and mist content.

2. Design of Wire Mesh Demister.

2.1General

A.Size, style, thickness, configuration, and materials are specified in XXX Project Specification – Vessels.

B.Mist Eliminator styles are defined as follows:

C.Style G is a mesh blanket having a variable knitted density. The vapor inlet section is the least dense and the outlet section the densest. Typical inlet/outlet knitted mesh densities are 5 lb/ft3 (80.1) and 9 lb/ft3 (144.2). The customer can require variable density blankets having slightly different knitted densities and wire diameters.

Style V is to be determined by the vendor, based on the process conditions provided by customer. Vendor may determine the mist eliminator type best suited to meet the mist elimination requirement. The selected style may include a mesh pad, vane or a combination of mesh & vanes. The mist eliminator may be oriented vertically, horizontally or at an angle determined by the vendor. A single pad of variable knitted density may also be applied.

3. Demister Inquiry Table if Calculation Suggestions and Service are needed

4. Features of wire mesh demister

•Light weight

•Easy to install

•No moving parts

•Shipped promptly

•Low pressure drop

•Requires no maintenance

•Fits all process equipment

•Wide variety of materials of construction available

High removal efficiency

No limitation on size or shape.

Easily installed in existing vessels

Little maintenance or service required

Almost no corrosion or temperature limitations

Negligible pressure drop, less than 25mm of water gauge

Tks for your reading ,i hope my introduction can help you to make a decision ,any question ,press the whatsapp ,feel freely let me know

Anping Yuanqiao Petrochemical Equipment Co., Ltd, founded in 2000, covering an area of 50000 square meters, is located in Anping County, Hebei Province, known as the "hometown of Chinese silk screen" and "silk screen industrial base". It is a professional manufacturer of wire mesh demister, vapor liquid filter screen, and steel plate mesh. It is committed to providing reliable quality separation devices for the manufacturing industry, and has the qualification of general taxpayer and independent import and export rights.

The main products of the wire mesh demister series include metal wire mesh demister, plastic wire mesh demister, pp wire mesh demister, drawer type wire mesh demister, embedded wire mesh demister, top mounted wire mesh demister, and bottom mounted wire mesh demister. Wave type wire mesh demister, also known as wave type demister or waveform demister. In industrial production, the removal of various mist, mist, vapor liquid separation, and particle separation in the air can achieve a capture efficiency of 98% -99.8% for mist with a particle size of ≥ 3~5um. It is widely used in gas-liquid separation devices in industries such as chemical, petroleum, tower manufacturing, and pressure vessels for desulfurization, mist removal, water removal, and droplet recovery in environmental engineering.

We are a physical manufacturer specializing in the production of vapor liquid filter screens and their products. Our company mainly produces metal vapor liquid filter screens in three types: stainless steel, copper, brass, alloy, and pure metal. Among the stainless steel materials, 304, 304L, 321, 316, and 316L are widely used, with Monel alloy as the main alloy material and pure nickel and titanium as the main pure metals. Our company mainly produces a series of products with over a hundred specifications and models in four categories: standard type, high-efficiency type, high penetration type, and damping type.

For many years, our company has established stable trade relations with multiple merchants with high-quality products, good reputation, and high-quality services. Our products are widely sold throughout the country and exported to countries and regions such as Japan, Singapore, Taiwan, etc. May we cooperate sincerely and seek common development on the basis of mutual integrity. Warmly welcome your visit