360 Degree Slewing Arm Cantilever Jib Crane 500kg With Electric Chain Hoist

500kg 360 Degree Slewing Arm Cantilever Jib Crane With Electric Chain Hoist

Column-type cantilever crane can design and customize special lifting equipment according to customer needs. The column jib crane has the advantages of novel structure, reasonableness, simplicity, convenient operation, flexible rotation, and large working space. It is suitable for lifting heavy objects in work, warehouses, docks and other occasions.

Fixed-column cantilever crane is a kind of crane used in conjunction with chain electric hoist. The crane is composed of column, reverse arm reverse drive equipment and electric hoist. The lower end of the column is fixed on the concrete foundation through anchor bolts. The pin wheel deceleration device is used to drive the cantilever to reverse, and the electric hoist runs on the cantilever I-beam in a straight line from left to right, and lifts heavy objects.

Precautions for cantilever crane work

1. When lifting the workpiece, it is not allowed to be too high from the ground. It should be about half the height of a person.
2. The operator of the cantilever crane should check whether there are any faults in the switch button and wire rope limit before use. If there is a problem, it must be repaired in time before use. After use, the power switch must be turned off before leaving.
3. It is not allowed to overload the lifting, and the lifting of any workpiece is not allowed to exceed 500kg, otherwise it will be severely punished according to the violation of the operating regulations.
4. When lifting any workpiece, try to lift it, the hook must be vertical, and adjust the hook in time if it is found to be unbalanced, and it is not allowed to hang it obliquely, and try the cantilever crane again to keep the workpiece stable before lifting.
5. Concentrate when lifting the workpiece, put your hands on the operating switch so that you can brake at any time, and do not chat or eat while lifting to avoid danger.
6. When the cantilever crane is lifting any workpiece, it should pay attention to the operation status at all times, stop the crane immediately when abnormal noise and abnormal phenomena occur, and report it in time for processing. If it is sick, it will be severely punished according to the violation of the operating regulations.
7. When not in use, the jib crane should be placed in a place where it is not allowed to obstruct the running route of other lifting equipment, and it is not allowed to park at will, otherwise it will be punished as a violation of operating regulations.
8. Surprise repairs are strictly prohibited when the cantilever crane is in use.

Product Parameter

FAQ: