1200kg Extension Type Vacuum Sheet Metal Suction Lifter For Lifting Steel Slab Plate

1200kg Extension Type Metal Sheet Vacuum Lifter For Lifting Steel Slab Plate

Product Introduction:

Sheet vacuum lifter is used for loading and unloading of various processing machines, such as laser cutting machine, plasma cutting machine, and shearing machine. It is suitable for flat plates such as aluminum plates, stainless steel plates, iron plates, and acrylic plates. Energy saving, environmentally and easy to operate,with adjustable cups ,and each cup with a manual ball valve to control opening and closing, easy to handle different sizes plates,the cup rod is equipped with double springs up and down. When the plate is uneven, the spring plays a cushioning role to make the cup's force uniform to ensure the safety and reliability of the vacuum lifter. The ends of main beam has been sealed by plate welding,used as vacuum storage tank. When the equipment is suddenly shut down, it is guaranteed that the plate can be reliably adsorbed at least 20 minutes.Japan panasonic vacuum pressure switch, assemble high sensitivity buzzer alarm unit. If don’t reach the setting pressure, then light up the yellow light to inhale in time.

Performance characteristics of sheet vacuum lifter:

1. The board is transported without damage. The vacuum suction cup uses rubber as the sealing material, and the board and the suction cup are in soft contact to ensure that there is no surface scratch on the board during the adsorption process or damage to the board by traditional hooks or electromagnetic lifting methods.
2. Single operator: The humanized design of the operating handle allows one operator to complete several tons of plates.
3. Sound and light alarm system: When the system has a power failure or a vacuum leak occurs, and the vacuum pressure drops below 60% of the safety set value, the buzzer will alarm and the warning light will flash at the same time.
4. Vacuum pressure holding system: The equipment is designed with a vacuum tank.
5. Safety insurance factor: 2.0

Technical Parameters:

FAQ: