Full Automatic Jump Starter Portable Charger For Lead Acid Battery Charger Plastic Shell Blue Battery Charger

Full Automatic Jump Starter Portable Charger For Lead Acid Battery Charger Plastic Shell Blue Battery Charger

Product Introduction:

Portable car battery charger is our factory according to lead-acid battery, maintenance-free battery, start battery, start-stop battery,12V24VBattery,12.6V lithium battery and professional design and production.

It adopts a dedicated intelligent microcomputer chip to control the whole process, and adopts advanced pulse width modulation technology. It has small size, safe and convenient,and high efficiency conversion, stable output current, large design capacity, can be operated at full load for a long time and so on. It is a new generation of eco-friendly chargers.

The charger has short-circuit protection, reverse polarity protection, overtemperature protection, and low-voltage protection. It can realize constant current, constant voltage, floating, trickle and other charging states.Improve battery life. Reduce the rate of battery water loss and eliminate battery heating and drum charging.

Operation:

Step 1: Check the current voltage of the battery to be charged.

Step 2: Whether the output voltage of the charger matches.

Step 3: Connect the charger and the battery to be charged correctly as required.

Step 4: Check that the mains voltage matches the charger's rated input voltage.

Step 5: Connect the power and connect the battery, observe whether the indicator light is on, and whether the cooling fan is working when charging.

Step 6: If the charger is not working properly, quickly disconnect the mains and check the mains, battery and all connections. (Please contact customer service in time)

Feature:

1. Intelligent Microcomputer Chip: The charger is equipped with a dedicated intelligent microcomputer chip that controls the entire charging process. This chip ensures accurate and precise charging based on the battery type and condition.

2.Pulse Width Modulation (PWM) Technology: The charger utilizes advanced pulse width modulation technology to regulate the charging process. PWM helps maintain a stable and controlled charging current, preventing overcharging and optimizing battery performance.

3.Compact Size and Convenience: The Pulse battery charger is designed to be compact, making it easy to carry and store. Its small size also allows for convenient placement in various settings, such as workshops, garages, or vehicles.

4.High Efficiency Conversion: The charger is designed for high-efficiency power conversion, which minimizes energy waste and maximizes the charging process's effectiveness. This efficiency helps reduce charging time and energy consumption.

5.Stable Output Current: The charger provides a stable output current throughout the charging process. This stability ensures consistent and reliable charging performance, promoting battery health and prolonging its lifespan.

Technical Parameters:

Rated input voltage range:110V-250V

Output voltage:12V/24V

Rated operating frequency:50/60HZ

Full load conversion efficiency:93%

Operating temperature range:-30°C-45°C

Charging mode:No load - constant current-constant pressure - float charge - trickle

FAQ:

Q: Why is the current getting smaller and smaller?The current is not 30A.

A: Charging principle: pulse. Pulse can protect the battery and prolong its service life.

The difference is that the pulse charger can keep the charging process dynamic, balance the charging and discharging process, reduce the water loss during the charging process, and prevent the problem of sulfation, so that the battery capacity can be restored and the battery life will be increased.

Pulse is not a constant voltage and current. It will match the charging voltage and current according to the battery status. The charging current will become smaller and smaller as the battery power increases.

The pulse is designed to better protect the battery from being injured due to overcharge.

Not all batteries can reach the peak current. If the battery capacity is large and the power loss is severe, the current will be higher.

Q: Are 12V/24V and lithium battery automatically compatible?

A: 1. Manual selection is required; 2. 12V/24V self-defined identification, lead-acid battery, water battery, dry battery. 3. Lithium battery: 12V, lithium iron phosphate battery cannot be charged (it depends on whether the charger supports 12.6V lithium battery)

Q: How to operate?

A: The first step is to check whether the battery is good or bad. Operation method: the charger is not plugged in, just clip the charger clip to the positive and negative poles of the battery. The display will show the current internal pressure of the battery. There are two conditions not shown: 1. Charger problem 2. Battery voltage is lower than 8V.

The second step is that the charger has normal input and output. Only plug in, and the display will be on. By default, 12V and POWER are on. When the red and black clips meet, the spark charger is completely normal.

Q:What is the differences between chargers?

A:1. Make sure what type of battery needs to be charged.
2.Different power sizes affect the charging time of the charger.

Q: What is the function of the charger?

A:1. Check the internal pressure of the battery; 2. Repair; 3. Charging.

Q: Why can't the battery reach the current you said?

A: Generally, the battery capacity is not large enough to give all the output current to the battery. I'm afraid that the battery can't bear it, which will make the battery damage.

P. S. Most of the batteries that need to be recharged with chargers have some problems

Q: Why cant the two 12V series connection recognize 24V for charging?

A: If the battery is a combination of two 12V batteries and can not directly identify the 24V charging, the internal pressure of the two batteries can be detected separately, and the large difference is unrecognizable. Two 12V batteries need to be charged separately

Q: Why does the display screen not light after plugging in?

A: 1.Plug in only, the display screen is not on, and the indicator light is not on. The safety tube is burnt and the product is defective

1. The 12V and power indicators are on. It may be that the display cable is loose. Maybe the display screen is broken