Fast Charging Jump Starter Portable Charger Smart Battery Maintainer Trickle Charger For Car Motorcycle Boat Marine

Fast Charging Jump Starter Portable Charger Smart Battery Maintainer Trickle Charger For Car Motorcycle Boat Marine

Product Introduction:

Our factory specializes in the production of portable car battery chargers designed for a wide range of battery types, including lead-acid batteries, maintenance-free batteries, start batteries, start-stop batteries, 12V and 24V batteries, and 12.6V lithium batteries. Our chargers are crafted with professional expertise and attention to detail.

To ensure precise and efficient charging, our portable car battery chargers incorporate a dedicated intelligent microcomputer chip. This advanced chip controls the entire charging process, allowing for optimized performance. Additionally, our chargers utilize advanced pulse width modulation (PWM) technology, which enhances efficiency and charging precision.

One of the standout features of our chargers is their compact size, making them easy to carry and store. They offer convenience and portability, allowing users to charge their batteries wherever they need to. Despite their small size, our chargers are designed to provide safe and reliable charging for various battery types.

Our portable car battery chargers boast high-efficiency conversion, meaning they effectively convert energy input into the desired output for charging purposes. This efficiency translates into a stable output current, ensuring consistent and reliable charging performance. With their large design capacity, our chargers can operate at full load for extended periods, making them durable and capable of handling demanding charging tasks.

Safety is a top priority in our charger design. Our chargers are equipped with protective features such as short-circuit protection, reverse polarity protection, overtemperature protection, and low-voltage protection. These safety measures safeguard both the charger and the battery being charged, minimizing the risk of damage or accidents.

Our chargers support various charging states, including constant current, constant voltage, floating, trickle, and others. These charging states are designed to optimize the charging process and improve battery life. By reducing the rate of water loss from the battery and eliminating issues like battery heating and overcharging, our chargers contribute to prolonging battery lifespan and ensuring its optimal functioning.

Advantage:

Smart mode:

When the user uses it for the first time, make sure that the switch is adjusted to the smart gear for charging. D uring the charging process, the charging current is automatically adjusted according to the battery size and battery status, and the charging is automatically stopped after charging to the set voltage value. This gear is full of self-stops.

Repair Mode:

Only the battery is below 11V voltage, this manual mode is for the battery internal resistance characteristics, professionally designed charging program, help repairing the battery function, so that the battery effect plays better, but the repair mode work must be carried out under manual care, in the battery shell has a slight heat when the repair is stopped. The notification repair time can be up to 1-2hours.

Function:

Ordinary battery: For the ordinary battery charging file(12V24V battery automatic recognition), it can charge12V,24V battery. When selecting the ordinary battery intelligent charging mode, when charging the 12V battery, the full voltage is 14.2V±0.2V, and the full voltage value for charging the 24V battery is 29.2V±0.4V.

Start-stop battery:For the start-stop battery file(12V24V battery automatic identification), it can charge 12V,24V battery, when selecting start-stop battery intelligent charging mode, charge the 12V battery, the full charge voltage is 14.6V±0.2V, and the full voltage value of the battery is 29.2V±0.4V.

Trouble Shooting:

It is shown full when charger to the battery charging time of few minutes

1. Check if the charger is observing the wind due to over current protection or low voltage protection(mismatch voltage). Or whether the fan is working.

2. Indicate that the battery has no capacity or is fully charged(it is recommended to discharge the battery before testing.) Or replace the battery test with another lack of power.

3. Check whether the charger output clip is in good contact with the battery output column.

The battery housing heats up when charging the battery or the charger does not show fully for a long time

1. Check whether the battery has a short circuit phenomenon,resulting in the charging voltage can not reach the rated voltage of the charger for a longtime.

2. Whether the battery already has leakage≥0.3 current.

3. Battery process, unqualified. It is recommended to replace the genuine battery.

4. Replace the good battery test.

Charger charged at normal connection time, buzzer alarm or not working at all

1. Check if the battery is badly powered,causes the charger to be protected against low voltage.

2. The battery is shelved for a longtime or the battery is seriously short-circuited.

3. Whether there is still a beep alarm in the load state when connect the power supply.

4. It is recommended replace the good battery test.

Safety Tips:

1. It is strictly prohibited to use in damp,high temperature,flammable,explosive objects gas environments.

2. It is strictly prohibited to use this machine in a state where the cooling air hole of the machine is blocked or the fan is damaged and stopped.

3. It is strictly prohibited to charge scrapped,non lead-acid batteries,or batteries without voltage! Do not charge non chargeable batteries! Do not approach open flames while charging! There is high voltage inside the machine and unauthorized disassembly is strictly prohibited.

4. For indoor use, beware of rain. During the charging process,someone must take care of the charger, and it is strictly prohibited to cover it. It must be placed in a well ventilated area for use. It is strictly prohibited to charged in or on a vehicle,and be cautious of flames,sparks,and explosive gases to avoid causing a fire.

5. To charge the battery of the vehicle or equipment, please remove the battery and place it in a safe and flammable environment. Otherwise, if an accident occurs, you will be held responsible.

6. There is high voltage and danger inside the charger. Non professional personnel are strictly prohibited from opening or modifying the machine, otherwise the consequences will be borne by oneself.

7. If the power input cord is damaged, to avoid danger, it must be replaced by the manufacturer, maintenance department, or similar professional personnel.

Before connecting or disconnecting the battery charger from the battery,the power should be disconnected first.

Technical Parameters:

Rated input voltage range:110V-250V

Output voltage:12V/24V

Rated operating frequency:50/60HZ

Full load conversion efficiency:93%

Operating temperature range:-30°C-45°C

Charging mode:No load - constant current-constant pressure - float charge - trickle

FAQ:

Q: Why is the current getting smaller and smaller?The current is not 30A.

A: Charging principle: pulse. Pulse can protect the battery and prolong its service life.

The difference is that the pulse charger can keep the charging process dynamic, balance the charging and discharging process, reduce the water loss during the charging process, and prevent the problem of sulfation, so that the battery capacity can be restored and the battery life will be increased.

Pulse is not a constant voltage and current. It will match the charging voltage and current according to the battery status. The charging current will become smaller and smaller as the battery power increases.

The pulse is designed to better protect the battery from being injured due to overcharge.

Not all batteries can reach the peak current. If the battery capacity is large and the power loss is severe, the current will be higher.

Q: Are 12V/24V and lithium battery automatically compatible?

A: 1. Manual selection is required; 2. 12V/24V self-defined identification, lead-acid battery, water battery, dry battery. 3. Lithium battery: 12V, lithium iron phosphate battery cannot be charged (it depends on whether the charger supports 12.6V lithium battery)

Q: How to operate?

A: The first step is to check whether the battery is good or bad. Operation method: the charger is not plugged in, just clip the charger clip to the positive and negative poles of the battery. The display will show the current internal pressure of the battery. There are two conditions not shown: 1. Charger problem 2. Battery voltage is lower than 8V.

The second step is that the charger has normal input and output. Only plug in, and the display will be on. By default, 12V and POWER are on. When the red and black clips meet, the spark charger is completely normal.

Q:What is the differences between chargers?

A:1. Make sure what type of battery needs to be charged.
2.Different power sizes affect the charging time of the charger.

Q: What is the function of the charger?

A:1. Check the internal pressure of the battery; 2. Repair; 3. Charging.

Q: Why can't the battery reach the current you said?

A: Generally, the battery capacity is not large enough to give all the output current to the battery. I'm afraid that the battery can't bear it, which will make the battery damage.

P. S. Most of the batteries that need to be recharged with chargers have some problems

Q: Why cant the two 12V series connection recognize 24V for charging?

A: If the battery is a combination of two 12V batteries and can not directly identify the 24V charging, the internal pressure of the two batteries can be detected separately, and the large difference is unrecognizable. Two 12V batteries need to be charged separately

Q: Why does the display screen not light after plugging in?

A: 1.Plug in only, the display screen is not on, and the indicator light is not on. The safety tube is burnt and the product is defective

1. The 12V and power indicators are on. It may be that the display cable is loose. Maybe the display screen is broken