Add to Cart
Led/Lcd Display Jump Starter Portable Charger 12v Battery Charger
Overtemperature Protection For Any Vehicle Batteries
Product Introduction:
Our factory specializes in manufacturing the Pulse battery charger,
which is specifically tailored to cater to a wide range of battery
types. These include lead-acid batteries, maintenance-free
batteries, start batteries, start-stop batteries, 12V and 24V
batteries, as well as 12.6V lithium batteries.
To ensure precise control over the charging process, our charger
incorporates a dedicated intelligent microcomputer chip. This chip
enables effective monitoring and management of the charging
parameters. The charger utilizes advanced pulse width modulation
(PWM) technology, resulting in a compact size that promotes safety
and convenience.
Efficiency is a key feature of our Pulse battery charger. It offers
high-efficiency conversion, ensuring that the energy input is
effectively converted into the desired output for charging the
battery. The charger also provides a stable output current,
allowing for consistent and reliable charging performance. With its
large design capacity, our charger is capable of operating at full
load for extended periods, making it a reliable and durable
solution.
Environmental sustainability is a core principle behind our Pulse
battery charger. It is designed as a next-generation eco-friendly
charger, taking into consideration the impact on the environment.
By incorporating efficient charging technology, the charger
minimizes energy waste and reduces its carbon footprint.
Safety is paramount in our charger's design. It includes multiple
protective features to safeguard against potential hazards. These
features encompass short-circuit protection, reverse polarity
protection, overtemperature protection, and low-voltage protection.
These measures help prevent damage to the battery and ensure safe
charging operations.
The Pulse battery charger supports various charging states to
accommodate different battery requirements. These states include
constant current, constant voltage, floating, trickle, and more. By
offering a range of charging options, our charger optimizes the
charging process, thereby enhancing battery life. Moreover, it
effectively reduces the rate of water loss from the battery and
eliminates problems associated with battery heating and
overcharging.
Protection:
1.Overtemperature protection: The charger shuts down protectively
when the charger temperature exceeds 105°C. At this time, there is
no current output, and it can be resumed when the temperature drops
to about 80 ° C or after about ten minutes of power off.
2.Short-circuit protection:When the charger output is unexpectedly
shorted, the charger will automatically turn off the output,
eliminate the short circuit, and automatically resume charging
after correct connection.
3.Reverse polarity protection: When the charger outputs positive
and negative poles opposite the charge, the charger will
automatically turn off the output, and the charging will
automatically resume charging after correctly connecting the
polarity.
4.Low-voltage protection: When the battery single cell voltage is
lower than 1.5V, the charger protection cannot be started, so as to
avoid damage to the device due to the mismatch between the battery
and the charger voltage.
Advantage:
Smart mode:
When the user uses it for the first time, make sure that the switch
is adjusted to the smart gear for charging. D uring the charging
process, the charging current is automatically adjusted according
to the battery size and battery status, and the charging is
automatically stopped after charging to the set voltage value. This
gear is full of self-stops.
Repair Mode:
Only the battery is below 11V voltage, this manual mode is for the
battery internal resistance characteristics, professionally
designed charging program, help repairing the battery function, so
that the battery effect plays better, but the repair mode work must
be carried out under manual care, in the battery shell has a slight
heat when the repair is stopped. The notification repair time can
be up to 1-2hours.
Technical Parameters:
Rated input voltage range:110V-250V
Output voltage:12V/24V
Rated operating frequency:50/60HZ
Full load conversion efficiency:93%
Operating temperature range:-30°C-45°C
Charging mode:No load - constant current-constant pressure - float
charge - trickle
Safety Tips:
In order to better maintain your battery, please do not charge the
battery until it is depleted. Lead-acid batteries are not memory
batteries.Suitable for diligent charging and diligent release. If
the power of the 12V battery is consumed below 10V, the battery is
greatly damaged at first, and the charger will also be easily
protected by overcurrent, when the user can turn off the power for
ten minutes to continue to use. At this point, your battery is low
voltage 10V.In a severe deficit state. Please pay attention to the
battery next time!!!
FAQ:
Q: Why is the current getting smaller and smaller?The current is
not 30A.
A: Charging principle: pulse. Pulse can protect the battery and
prolong its service life.
The difference is that the pulse charger can keep the charging
process dynamic, balance the charging and discharging process,
reduce the water loss during the charging process, and prevent the
problem of sulfation, so that the battery capacity can be restored
and the battery life will be increased.
Pulse is not a constant voltage and current. It will match the
charging voltage and current according to the battery status. The
charging current will become smaller and smaller as the battery
power increases.
The pulse is designed to better protect the battery from being
injured due to overcharge.
Not all batteries can reach the peak current. If the battery
capacity is large and the power loss is severe, the current will be
higher.
Q: Are 12V/24V and lithium battery automatically compatible?
A: 1. Manual selection is required; 2. 12V/24V self-defined
identification, lead-acid battery, water battery, dry battery. 3.
Lithium battery: 12V, lithium iron phosphate battery cannot be
charged (it depends on whether the charger supports 12.6V lithium
battery)
Q: How to operate?
A: The first step is to check whether the battery is good or bad.
Operation method: the charger is not plugged in, just clip the
charger clip to the positive and negative poles of the battery. The
display will show the current internal pressure of the battery.
There are two conditions not shown: 1. Charger problem 2. Battery
voltage is lower than 8V.
The second step is that the charger has normal input and output.
Only plug in, and the display will be on. By default, 12V and POWER
are on. When the red and black clips meet, the spark charger is
completely normal.
Q:What is the differences between chargers?
A:1. Make sure what type of battery needs to be charged.
2.Different power sizes affect the charging time of the charger.
Q: What is the function of the charger?
A:1. Check the internal pressure of the battery; 2. Repair; 3.
Charging.
Q: Why can't the battery reach the current you said?
A: Generally, the battery capacity is not large enough to give all
the output current to the battery. I'm afraid that the battery
can't bear it, which will make the battery damage.
P. S. Most of the batteries that need to be recharged with chargers
have some problems
Q: Why cant the two 12V series connection recognize 24V for
charging?
A: If the battery is a combination of two 12V batteries and can not
directly identify the 24V charging, the internal pressure of the
two batteries can be detected separately, and the large difference
is unrecognizable. Two 12V batteries need to be charged separately
Q: Why does the display screen not light after plugging in?
A: 1.Plug in only, the display screen is not on, and the indicator
light is not on. The safety tube is burnt and the product is
defective
1. The 12V and power indicators are on. It may be that the display
cable is loose. Maybe the display screen is broken