AGM Motor Battery Charger Intelligent Maintainer Trickle Charger Silver Color Lead-Acid Battery Charger Led Display

AGM Motor Battery Charger Intelligent Maintainer Trickle Charger Silver Color Lead-Acid Battery Charger Led Display

Product Description:

Pulse battery charger is our factory according to lead-acid battery, maintenance-free battery, start battery, start-stop battery,12V24VBattery,12.6V lithium battery and professional design and production.

It adopts a dedicated intelligent microcomputer chip to control the whole process, and adopts advanced pulse width modulation technology. It has small size, safe and convenient,and high efficiency conversion, stable output current, large design capacity, can be operated at full load for a long time and so on. It is a new generation of eco-friendly chargers.

The charger has short-circuit protection, reverse polarity protection, overtemperature protection, and low-voltage protection. It can realize constant current, constant voltage, floating, trickle and other charging states.Improve battery life. Reduce the rate of battery water loss and eliminate battery heating and drum charging.

Technical Parameters:

Rated input voltage range:110V-250V

Output voltage:12V/24V

Rated operating frequency:50-57HZ

Full load conversion efficiency:93%

Operating temperature range:-30°C-45°C

Charging mode:No load - constant current-constant pressure - float charge - trickle

Feature:

1. Intelligent Microcomputer Chip: The charger is equipped with a dedicated intelligent microcomputer chip that controls the entire charging process. This chip ensures accurate and precise charging based on the battery type and condition.

2.Pulse Width Modulation (PWM) Technology: The charger utilizes advanced pulse width modulation technology to regulate the charging process. PWM helps maintain a stable and controlled charging current, preventing overcharging and optimizing battery performance.

3.Compact Size and Convenience: The Pulse battery charger is designed to be compact, making it easy to carry and store. Its small size also allows for convenient placement in various settings, such as workshops, garages, or vehicles.

4.High Efficiency Conversion: The charger is designed for high-efficiency power conversion, which minimizes energy waste and maximizes the charging process's effectiveness. This efficiency helps reduce charging time and energy consumption.

5.Stable Output Current: The charger provides a stable output current throughout the charging process. This stability ensures consistent and reliable charging performance, promoting battery health and prolonging its lifespan.

Function:

Lithium battery: Specially set for charging three strings of 12.6V lithium batteries. The 12V lithium battery has a full charge voltage of 12.6V. It is forbidden to charge lithium batteries or faulty batteries of other specifications.

Ordinary battery: For the ordinary battery charging file(12V24V battery automatic recognition), it can charge12V,24V battery. When selecting the ordinary battery intelligent charging mode, when charging the 12V battery, the full voltage is 14.2V±0.2V, and the full voltage value for charging the 24V battery is 29.2V±0.4V.

Start-stop battery:For the start-stop battery file(12V24V battery automatic identification), it can charge 12V,24V battery, when selecting start-stop battery intelligent charging mode, charge the 12V battery, the full charge voltage is 14.6V±0.2V, and the full voltage value of the battery is 29.2V±0.4V.

Attention:

1. When the charger is working to charge the battery,the cooling fan must be working properly.

2. Other modes are prohibited when charging the lithium battery to prevent the damage to the lithium battery with different voltage values. 12V lithium battery full charge voltage of 12.6±0.2V; The 24V lithium battery has a full charge voltage of 25.2±0.2V.

3. Charger 12V voltage identification display range 10V-15V,24Vvoltage identification display range in 20V-29V. The full charge voltage of the 12V battery is 14.6±+0.2V; The 24V lithium battery has a full charge voltage of 29.2V±0.4V.

4. The first charge of the leakage battery and the battery below 20AH should be manually monitored, and the appearance of the battery and the battery liquid should be checked to avoid overcharge of the battery and deformation of the drum.

FAQ:

Q: Why is the current getting smaller and smaller?The current is not 30A.

A: Charging principle: pulse. Pulse can protect the battery and prolong its service life.

The difference is that the pulse charger can keep the charging process dynamic, balance the charging and discharging process, reduce the water loss during the charging process, and prevent the problem of sulfation, so that the battery capacity can be restored and the battery life will be increased.

Pulse is not a constant voltage and current. It will match the charging voltage and current according to the battery status. The charging current will become smaller and smaller as the battery power increases.

The pulse is designed to better protect the battery from being injured due to overcharge.

Not all batteries can reach the peak current. If the battery capacity is large and the power loss is severe, the current will be higher.

Q: Are 12V/24V and lithium battery automatically compatible?

A: 1. Manual selection is required; 2. 12V/24V self-defined identification, lead-acid battery, water battery, dry battery. 3. Lithium battery: 12V, lithium iron phosphate battery cannot be charged (it depends on whether the charger supports 12.6V lithium battery)

Q: How to operate?

A: The first step is to check whether the battery is good or bad. Operation method: the charger is not plugged in, just clip the charger clip to the positive and negative poles of the battery. The display will show the current internal pressure of the battery. There are two conditions not shown: 1. Charger problem 2. Battery voltage is lower than 8V.

The second step is that the charger has normal input and output. Only plug in, and the display will be on. By default, 12V and POWER are on. When the red and black clips meet, the spark charger is completely normal.

Q:What is the differences between chargers?

A:1. Make sure what type of battery needs to be charged.
2.Different power sizes affect the charging time of the charger.

Q: What is the function of the charger?

A:1. Check the internal pressure of the battery; 2. Repair; 3. Charging.

Q: Why can't the battery reach the current you said?

A: Generally, the battery capacity is not large enough to give all the output current to the battery. I'm afraid that the battery can't bear it, which will make the battery damage.

P.S. Most of the batteries that need to be recharged with chargers have some problems

Q: Why cant the two 12V series connection recognize 24V for charging?

A: If the battery is a combination of two 12V batteries and can not directly identify the 24V charging, the internal pressure of the two batteries can be detected separately, and the large difference is unrecognizable. Two 12V batteries need to be charged separately

Q: Why does the display screen not light after plugging in?

A: 1.Plug in only, the display screen is not on, and the indicator light is not on. The safety tube is burnt and the product is defective

1. The 12V and power indicators are on. It may be that the display cable is loose. Maybe the display screen is broken