Add to Cart
K700 Removable SMT Trolley ESD SMT Splice Cart With Wheels
DESCRIPTION |
K700 SMT Splicing Tool ESD SMT Splice Cart. A trolley for the placement of splicing tool, clips |
and tapes and equipped with rotatable wheels, it can be moved freely on different SMT production |
lines. |
Part | Dimensions | Material | Packing |
K700 | 100~110cm x 55cm x 42cm | Steel body + Hollow board | 1 Pcs per box |
APPLICATION | ADVANTAGES |
1. It can be moved freely on different | 1. ESD design to eliminate the static |
SMT production lines | damage in the production lines |
2. Must be used with KangHongJin | 2. Wheel rotatable can be movable around |
splicing tool MTL60 | production floor in all direction |
3. Allow two operators to splicing tape | 3. Splicing plate: Height can be adjusted |
simultaneously | 900mm~1030mm. |
4. Easy operation and good reliability, | 4. Special designed tool base and copper scrap |
improve the efficiency | collection box: splice plier can be rotated freely |
5. Junk box: simple and light with anti-static |
INSTRUCTIONS
1. Adjust the SMT Splice Cart to make the height suitable for youreself |
2. Place the component carrier tape on the 2mm or 4mm pitch placement pin guides. |
3. Intall M0700 clips on MTL60 |
4.Center both carrier tapes (cover tape up) on the pins, and secure with the clamps. |
5. Crimp the handle to connect the carrier tapes and remove |
6. Add a splice tape strip to the cover tape and press firmly to complete the splice. |
ceo@szsmt. com |