Add to Cart
M01 series SMT Double Splice Tape with double embossed dots designed apply for all sizes(8mm-88mm) of carrier tape
DESCRIPTION |
Double Splice Tapes are used to join SMT component carrier tapes. Supplied in pre-cut strips of |
PET tape, use without the splice tool and clip. Each piece has 10 embossed dots on either side to |
help align with the carrier tape. Three kinds of anti-static, half anti-static and non anti-static. |
Part (reel) | Dimensions (pc) | Package | |
M0108 (8mm) | 4.8mm x 40mm | 500pcs/box | |
M0112 (12mm) | 6mm x 40mm | 500pcs/box | |
M0116 (16mm) | 9.5mm x 40mm | 500pcs/box | |
M0124 (24mm) | 16mm x 40mm | 250pcs/box |
APPLICATION | ADVANTAGES |
1. Green double strips of PET tape used to | 1. Increase Pick and Place machine output |
join SMT carrier tapes | by 5% - 30% |
2. Possible to use with or without the | 2. Reduce reel change downtime |
splice tool and clip | 3. Decrease machine abrasion by reducing |
3. 32mm-44mm available upon request | the need to reload the feeder |
4. Guide indentations for easy alignment |
INSTRUCTIONS
1. Use the cutting tool (MTL20/MTL30/MTL40) to accurately cut the carrier tapes. |
2. Remove the release liner of the splice tape to reveal the adhesive side. |
3. Align the holes of the carrier tapes (cover tape down) with the guide indentations. |
4. Place both joining carrier tapes onto the first strip of the splice tape. |
5. Fold over the second strip to the underside of the carrier tape and press firmly. |
6. Remove and discard the clear plastic cover to complete the splice. |
ceo@szsmt. com |