Add to Cart
High Precision speed live centre lathe accessoriescnc lathe machining
High Precision speed live centre lathe accessories , High-precision waterproof and oil-resistant Morse lathe live top, the number of revolutions 3000. Precision 0.003 thrust bearing and needle roller bearings for high-speed CNC lathe machining in the load, the mandrel extended to the taper shank, to maximize cutting Performance, reduce the impact of vibration, the use of alloy steel mandrel, heat treatment after the hardness HRc60o ± 2o, with high rigidity and high wear resistance, dust-proof front seal to prevent cutting fluid and dust into the bearings.
Morse Taper Live Centre Specifications
1. Ultra-precision High Speed Live Centre Center assembly bearings,
thrust bearings
2. High Speed Live Centre Can be used at medium speed
3. Shaft made of alloy steel, through heat treatment
4.HRC58-60, handle super steel features and high durability.
5. The plunger uses precision-matched angular contact ball bearings
and roller bearings to further improve the accuracy of the rotary
tip.
6. Front with dust-proof, waterproof seal, to extend the life of
the top
7. Suitable for precision machining CNC high speed heavy load.
8. Ultra-precision Live Centre Accuracy: 0.003mm
9. Speed Live Centre Material: Body: 40Cr HRC40-45
Sharp: GGr15 HRC58-62
Product advantages
1 High-precision waterproof and oil-resistant Morse lathe live top,
the number of revolutions 3000. Precision 0.003 thrust bearing and
needle roller bearings for high-speed CNC lathe machining in the
load, the mandrel extended to the taper shank, to maximize cutting
Performance, reduce the impact of vibration, the use of alloy steel
mandrel, heat treatment after the hardness HRc60o ± 2o, with high
rigidity and high wear resistance, dust-proof front seal to prevent
cutting fluid and dust into the bearings.
2 Ultra-precision High Speed Live Centre body material: 40Cr
forgings, heat treatment hardness HRC40 ~ 42
3-axis tip material: alloy tool steel, heat treatment hardness
HRC58-60, with high rigidity and wear resistance.
Precision cylindrical roller bearings choice
4-pin roller bearing bearings.
High precision live centre lathe accessories refer to the tools and
attachments used with a lathe to enhance its precision and
accuracy. These accessories are designed to provide support and
stability to the workpiece, ensuring smooth and precise machining
operations. Some common high precision live centre lathe
accessories include:
1. Live Centre: A live centre is a rotating center that supports
the workpiece on the tailstock end of the lathe. It helps in
reducing friction and allows the workpiece to rotate smoothly.
2. Dead Centre: A dead centre is a fixed center that supports the
workpiece on the headstock end of the lathe. It is used when the
workpiece does not require rotation.
3. Faceplate: A faceplate is a large circular plate that attaches
to the spindle of the lathe. It provides a flat surface for
mounting and securing large or irregularly shaped workpieces.
4. Chuck: A chuck is a device used to hold and secure the workpiece
during machining operations. It can be either a three-jaw chuck or
a four-jaw chuck, depending on the type of workpiece and machining
requirements.
5. Collet: A collet is a cylindrical sleeve that holds the
workpiece in place. It provides a high level of precision and
accuracy, especially for small diameter workpieces.
6. Steady Rest: A steady rest is used to support long and slender
workpieces during machining. It helps in reducing vibration and
ensuring stability, resulting in better precision and surface
finish.
7. Follow Rest: A follow rest is similar to a steady rest but is
used to support the workpiece during turning operations. It follows
the contour of the workpiece, providing additional support and
stability.
8. Toolpost: A toolpost is a device that holds the cutting tools
used for machining operations. It allows for quick and easy tool
changes, ensuring precise and accurate cutting.
9. Quick Change Toolpost: A quick change toolpost is a toolpost
that allows for rapid tool changes without the need for additional
adjustments. It saves time and improves efficiency in the machining
process.
10. Digital Readout (DRO): A digital readout is an electronic
device that displays the position of the cutting tool or the
movement of the lathe. It provides accurate measurements and helps
in achieving precise machining operations.
These high precision live centre lathe accessories are essential
for achieving accurate and precise machining results. They provide
support, stability, and ease of use, allowing for efficient and
high-quality machining operations.
Model.No | D | D1 | D2 | H | a | L | L1 | L2 | L3 | PRECISION | Speedr.min﹣1 | KGS |
MT2 | 17.78 | 20 | 43 | 6 | 60° | 150 | 80 | 54 | 14 | 0.003 | 8000 | 0.85 |
MT3 | 23.825 | 22 | 53 | 6.5 | 175 | 94 | 54 | 16 | 8000 | 1.3 | ||
MT4 | 31.627 | 28 | 63 | 8.5 | 218 | 116 | 65 | 15 | 6000 | 2.1 | ||
MT5 | 44.399 | 38 | 83 | 8.5 | 267 | 132 | 78 | 20 | 5000 | 4.7 |