Add to Cart
HSK ER Collet Chuck DIN69893 for CNC Processing with High System Accuracy
HSK ER Collet Chuck DIN69893 for CNC Processing,Hsk tool holder is
the handle of high speed cutting tools. hsk toolholder has become
an important part of machining manufacturing technology in high
speed cutting, and has become an important part of machining
manufacturing technology in high speed cutting. The machining
performance of the traditional BT toolholder has been difficult to
meet the requirements of high-speed cutting. While the tool system
can perform cutting at high speed, the following basic conditions
shall be met:
1. High system accuracy
The system precision includes the system positioning and clamping
precision and the tool repeated positioning precision. The former
refers to the connection precision between the tool and the tool
handle, and between the tool handle and the machine tool spindle;
The latter refers to the consistency of tool system accuracy after
each tool change. The tool system has a high system accuracy, which
can ensure the static and dynamic stability of the tool system
under high-speed machining conditions.
2. High system stiffness
The static and dynamic stiffness of the tool system is an important
factor affecting the machining accuracy and cutting performance.
The insufficient rigidity of the tool system will cause the
vibration of the tool system, which will reduce the machining
accuracy, aggravate the wear of the tool and reduce the service
life of the tool.
3. Good dynamic balance
Under the condition of high speed machining, the unbalance of small
mass will cause huge centrifugal force, which will cause sharp
vibration of the machine tool in the process of machining.
Therefore, the dynamic balance of high-speed tool system is very
important.
HSK ER collet chuck Specifications
1.Products name:HSK ER Collet Chuck Tool Holder
2.Model Number:HSK30,HSK40,HSK50,HSK63,HSK100
3.Application:milling Tool Holder for CNC Routers
4.Material:Stainless steel
5.Standard:DIN69893
6.Hardness:HRC58±2mm
7.Rotating speed:G2.5 30000rpm
8.Runout:within 5 μm
9.Surface Roughness:Ra<0.25μm
10.Taper cone:<AT3
11.Carburizing:0.8mm
Model No | L | L1 | L2 | D(h10) | d1 | d2 | d3(MAX) | T | KGS |
HSK63A-ER16-80 | 112 | 80 | 54 | 63 | 28 | 16 | 53 | M10×1.5P | 1.50 |
HSK63A-ER16-100 | 132 | 100 | 74 | 1.55 | |||||
HSK63A-ER16-120 | 152 | 120 | 94 | 1.70 | |||||
HSK63A-ER20-80 | 112 | 80 | 54 | 34 | 20 | M12×1.75P | 1.60 | ||
HSK63A-ER20-100 | 132 | 100 | 74 | 1.70 | |||||
HSK63A-ER20-120 | 152 | 120 | 94 | 1.60 | |||||
HSK63A-ER25-80 | 112 | 80 | 54 | 42 | 25 | M16×2.0P | 1.70 | ||
HSK63A-ER25-100 | 132 | 100 | 74 | 1.80 | |||||
HSK63A-ER25-120 | 152 | 120 | 94 | 2.00 | |||||
HSK63A-ER25-150 | 182 | 150 | 124 | 2.30 | |||||
HSK63A-ER32-80 | 112 | 80 | 54 | 50 | 32 | 2.50 |