JLSJ-8HP High Efficiency Laser Water Chiller With Overload Overheat Protection

JLSJ-8HP High Efficiency Laser Water Chiller For Stable Laser Performance

Product Description:

A laser chiller is a cooling device that utilizes a laser cooling system. The laser will generate a lot of heat when it is working. If it is not cooled in time, the performance of the laser will be reduced or damaged. The laser chiller transfers the heat generated by the laser to the cold water, and circulates the water to take away the heat to keep the laser working stably.

Laser chillers are usually composed of compressors, condensers, cooling towers, water pumps, water tanks, control systems, etc. The compressor compresses the refrigerant into a high-temperature and high-pressure gas, cools it into a high-pressure liquid through the condenser, and then expands it into a low-temperature and low-pressure gas through the expansion valve, absorbing the heat of the laser and taking it away. Cooling towers use air to dissipate heat from water, reducing the temperature of the water. A water pump circulates cold water into the laser, removes heat, and circulates back to the cooling tower again. The control system can monitor the water temperature and cooling effect in real time, and adjust the water temperature and water flow as needed.

Production Features:

Laser chiller is a device specially designed to provide cooling for laser equipment. Its performance plays an important impact on the operation and performance of laser equipment. Here are some important factors related to laser chiller performance:

1. Cooling capacity: The cooling capacity of the laser chiller refers to the cooling power or cooling capacity it can provide. This depends on the cooling capacity and design parameters of the chiller. The cooling capacity needs to be selected according to the power and heat dissipation needs of the laser equipment to ensure that the temperature of the laser equipment can be effectively controlled.

2. Temperature stability: The laser chiller should have good temperature stability, that is, it can maintain a stable cooling water temperature within the set temperature range. Stable cooling water temperature can ensure stable working conditions of laser equipment and reduce the impact of temperature fluctuations on equipment performance.

3. Noise Level: The noise level of the laser chiller is another factor to consider. Excessive noise may cause disruption and inconvenience to the work environment and operators. Therefore, when choosing a laser chiller, you need to pay attention to its noise level and choose a low-noise model that meets the requirements.

4. Energy saving efficiency: Energy saving efficiency is an evaluation of the energy efficiency of the laser chiller. Efficient laser chillers deliver the required cooling capacity with lower energy consumption, reducing operating costs and environmental impact.

5. Control and monitoring functions: Modern laser chillers usually have advanced control and monitoring functions. These functions can realize real-time monitoring and control of temperature, pressure, flow and other parameters to ensure the stable operation of the cooling system, and provide alarm and fault diagnosis functions.

6. Maintenance and reliability: Laser chiller maintenance and reliability are also important considerations. Equipment that is easy to maintain and maintain reduces downtime and extends service life. In addition, reliability is the key to ensuring continuous operation of laser equipment, so it is necessary to choose a laser chiller with high reliability.

Choosing a suitable laser chiller requires comprehensive consideration of the laser equipment’s cooling needs, working environment, budget, and other specific requirements. During the selection process, it is recommended to refer to the manufacturer's specifications and recommendations to ensure that the laser chiller can meet the cooling needs of the laser equipment and has the required performance and reliability.

Working Principle:

The working principle of the laser chiller is to transfer the heat generated by the laser to the cold water, and take away the heat through the circulating water to keep the laser working stably. Specifically, a laser chiller usually consists of the following parts:

1.Refrigeration system: The refrigeration system is composed of compressor, condenser, expansion valve and evaporator. The compressor compresses the refrigerant into a high-temperature and high-pressure gas, cools it into a high-pressure liquid through the condenser, and then expands it into a low-temperature and low-pressure gas through the expansion valve, absorbing the heat of the laser and taking it away. The evaporator is a heat exchanger in the refrigeration system, which exchanges heat between the refrigerant and the circulating water to lower the water temperature.

2.Water circulation system: The water circulation system consists of water pumps, water tanks, cooling towers and water pipes. A water pump circulates cold water into the laser, removes heat, and circulates back to the cooling tower again. The cooling tower dissipates heat through the air to lower the temperature of the water, and then it is circulated into the laser by the water pump again.

3.Control system: The control system can monitor the water temperature and cooling effect in real time, and adjust the water temperature and water flow according to the needs, so as to ensure the stable operation of the laser.

When the laser starts to work, it will generate a lot of heat, which is conducted to the laser chiller through the laser's water cooling system. The refrigerant in the refrigeration system absorbs the heat generated by the laser in the evaporator and carries it away. At the same time, the water pump in the water circulation system circulates cold water into the laser, takes the heat away, and circulates back to the cooling tower again. The control system can monitor the water temperature and cooling effect in real time, and adjust the water temperature and water flow according to the needs, so as to ensure the stable operation of the laser.

Techinical Parameters:

Application Industry:

Laser chiller is a high-efficiency, energy-saving and environmentally friendly refrigeration equipment. It mainly drives the refrigeration cycle through the heat generated by laser processing, and transfers the heat to the cooling medium to achieve the purpose of cooling and cooling. Laser chillers are widely used in the following industries:

1.Laser processing industry: Laser cutting, drilling, welding and other processing processes will generate a lot of heat, which needs to be cooled by a laser chiller to ensure the quality and stability of laser processing.

2.Medical industry: Laser chillers can be used to cool medical equipment, such as nuclear magnetic resonance instruments, ultrasonic diagnostic instruments and other medical equipment, to ensure the normal operation of the equipment.

3.Electronics industry: Laser chillers can be used in semiconductor manufacturing, electronic component manufacturing and other industries to ensure the temperature stability of the equipment and improve the stability and life of the equipment.

4.Chemical industry: Laser chillers can be used for cooling chemical reactors, cooling towers and other equipment to ensure the stability and efficiency of chemical reactions.

5.Food industry: Laser chillers can be used in food processing, refrigeration, freezing and other links to ensure the quality and safety of food.

In short, laser chillers are widely used in many industries, which can improve production efficiency and ensure product quality and safety.

Automotive Manufacturing Chemical Engineering Electronics Industry Electroplating Industry

Dongguan Jialisheng Refrigeration Equipment Co., Ltd. is a modern enterprise focusing on the research, development, production, sales and service of industrial temperature control equipment. Since its establishment, the company has been focusing on the field of industrial temperature control. With abundant R&D reserve resources and rich practical experience, it is one of the few domestic enterprises focusing on single production of temperature control equipment and providing temperature system solutions. We have maintained a close strategic partnership with various domestic equipment manufacturers and domestic universities for a long time. Jialisheng people's tireless pursuit of technological innovation and equipment quality has been unanimously recognized and respected by the industry and users.

Jialisheng strictly implements the international quality system standards, always pursues the advanced international management mode, and constantly absorbs the manufacturing technology of temperature control equipment at home and abroad. At present, the successfully developed product series include: industrial air-cooled chiller, water-cooled chiller, integrated cold and hot chiller, anti-corrosion chiller, UV curing dedicated chiller, low-temperature chiller, screw chiller, industrial air cooler, precision oil cooler，Frequency conversion chiller, Evaporative cooling integrated chillers, mold temperature controller and other temperature control equipment. It has a complete range, involving temperature control in various industries, and can also provide users with various non-standard customized equipment. Through the unremitting efforts of all staff on temperature control technology, the company has obtained a number of patent intellectual property rights. It can better and more professionally provide users with high-quality temperature control equipment.

Jialisheng products are widely used in rubber injection molding, light guide plate, connector, chemical industry, die-casting, reactor, rubber tire, calendering, shoe materials, printing and dyeing, drying, internal refining and other industries. While dominating China, the products are also exported to Vietnam, India, Malaysia, Thailand, Japan, South Korea and other Southeast Asian countries, as well as the United States, Italy, Brazil, Europe, the Middle East, Africa and other parts of the world.

Today's Jialisheng will continue to adhere to the service tenet of international high standard design and high quality requirements. Based in China and looking around the world, it is committed to providing users with satisfactory temperature control equipment and thoughtful pre-sales, in sales and after-sales services. Adhering to the enterprise philosophy of "single-minded, professional, dedicated, innovative, quality, integrity, service," Jialisheng strives for innovation with science and technology, development with quality, brand with integrity, and foundation stone with focus. It sincerely hopes to cooperate with friends from all walks of life to jointly develop and create brilliance.