Harmless Urinary Three Way Foley Catheter Multipurpose Yellow Color

Dufour Tip Reinforced 3 way Latex Foley Cathether with Big Balloon

Usage: Dufour Tip has evenly shaped, open and angled tip with 2 sets of large, opposite eyes. It is used on male patients for big blood clot suction after prostatectomy operation.

Features:

1. Reinforced tube, which will not kinked during negative pressure suction

2. Big balloon for option: 30-50ml, 60-80ml

3. Evenly balloon, large open eyelet

4. Silicone coating on surface, good bio-compatibility

Size:

Method of bladder flushing with a large flow catheter

(1) Closed flushing method: that is, the infusion bottle is rinsed, the medicine solution is rinsed or placed inside the infusion bottle, and hung on the bedside infusion stand. The bottle is about 1 meter high from the patient's pelvis, connected to a tee under the infusion tube, and then connected to a urine tube and a drainage tube respectively. The height of the tee is slightly lower than the pubic symphysis plane to facilitate the emptying of fluid in the bladder. When flushing, first clamp the drainage tube and inject the flushing solution at a rate of 60 drops per minute. After each injection of 100ml, clamp the infusion tube and open the drainage tube, allowing the flushing solution to flow out. Repeat this process for 3-4 times each time.

(2) Open flushing method: Use a bladder irrigator or large syringe to separate the joint of the indwelling catheter or cystostomy tube during each flushing. Wrap the distal drainage tube joint with sterile gauze and place it aside. After disinfecting the end of the catheter or cystostomy tube, hold it with sterile gauze. Connect the irrigator with the flushing solution to the end of the catheter, slowly inject the flushing solution, and then naturally flow out or slowly suck it out. Repeat this process until the effluent clarifies. After flushing, rinse the distal drainage tube once, then connect the catheter or cystostomy to continue drainage

product photo:

FAQ:

1.Q:Are you a factory or trading company?
A: We are a factory, we have rich experience for manufacturing more than 9 years.

2.Q:Where is your factory located? How can i visit there?
A: Our factory is located in Nanchang city,Jiangxi Province,China.
It is about more than 4 hours from Shanghai airport, We can pick you up if you need, welcome to visit our factory.

3.Q:Can you make samples?
A: Yes, we can make samples for you.

4.Q:How does your factory do as quality control?
A: Quality is the lift of our factory. We have inspector in different post, and there are three inspectors before packing to get best quality products.

7.Q: How is your after sale?
A: 1.If any damaged rings in the course of carriage, with the checking it's our mistake, we will take full responsibility to compensate the customers.

8.Can I get some samples?
We are honored to send samples to you for free. It is up to you to decide where you want to send them.

9.Can you do custom-made?
OEM,ODM welcomed.
1).Silk print your logo on the product.
2).Customized colorbox.
3).Design and produce based on your idea and draft.

YILI MEDICAL is professional manufacturer and supplier of medical supplier over 9 years. With the rapid development of sales and the demand of the expanding market, YiLi medical company has grown from a single product to diversified products.Our main products are including breathing anesthesia product , urinary, and injection infusion, etc. Three family owned factories are running different product lines ensure we are able to offervarious products and offer you one-stop service.

1. Exhibition Information:

2. Product shipment information：