Cuffed Oral Endotracheal Tube DEHP Free For Breathing Anesthesiology

Oral Type Preformed Disposable Tracheal Tube with cuff

Oral type ETT tube is used for Oral intubation, Catheter insert through patient's Oral. It is used in condition that nose unable addressed medical device.

Usage: Establish artificial ariway for patients for first aid, ICU, surgical operation
A tracheal tube is a plastic catheter that is inserted into the trachea for the primary purpose of establishing and maintaining a patent airway and to ensure the adequate exchange of oxygen and carbon dioxide.

Feature:
Materail: Medical Grade PVC ( DEHP Free available )
X ray radio opaque line through
With Smooth Murphy Eyelets
Scalp printing through tube
Evenly balloon, high volume low pressure
Pilot balloon: Size printing is available

Specification:

Care for tracheal intubation tube:
Firstly, maintain an appropriate position to prevent the sleeve from falling off, specifically:
1. After tracheotomy, the patient's position should not change too much. When turning over to change the position, the movements should be gentle and keep the upper part of the head and neck in the same line, and rotate at the same time to avoid difficulty breathing due to the detachment of the cannula.
2. Patients who are irritable should appropriately restrain their limbs to prevent extubation.
3. Patients with skull base fractures and cerebrospinal fluid leakage should be positioned in a position that is conducive to drainage to prevent intracranial infection caused by reflux.
4. A spare sleeve needs to be placed next to the bed to prevent use during tube detachment.
5. When disinfecting and removing the endotracheal tube, attention should be paid to the direction.
Secondly, correct sputum suction care
1. Strict aseptic operation should be carried out to avoid cross infection.
2. Before suction, check the pressure of the suction tube and ensure that the suction tube is unobstructed. The outer diameter should not exceed half of the inner diameter of the endotracheal tube.
3. When aspirating phlegm, the suction tube must be gently inserted to a depth of about 8 to 12 centimeters or until it cannot be inserted without negative pressure, and then withdrawn under negative pressure. In areas with excessive secretions, it is necessary to make a slight stop, with gentle movements. Rough handling is prohibited, and sputum should not be aspirated more than twice a day. Otherwise, the patient may experience severe coughing, throat spasms, respiratory depression, and hypoxia, which can worsen the condition


Product photo:



FAQ:

1.Q:Are you a factory or trading company?

A: We are a factory, we have rich experience for manufacturing more than 9 years.

2.Q:Where is your factory located? How can i visit there?

A: Our factory is located in Nanchang city,Jiangxi Province,China.

It is about more than 4 hours from Shanghai airport, We can pick you up if you need, welcome to visit our factory.

3.Q:What is the material for your products?

A: The material is medical grade PVC/pp/Latex/silicone/Stainless Steel

4.Q:Can you make samples?

A: Yes, we can make samples for you.

5.Q:How does your factory do as quality control?

A: Quality is the lift of our factory. We have inspector in different post, and there are three inspectors before packing to get best quality products.

6.Q: How is your after sale?

A: 1.If any damaged rings in the course of carriage, with the checking it's our mistake, we will take full responsibility to compensate the customers.

YILI MEDICAL is professional manufacturer and supplier of medical supplier over 9 years. With the rapid development of sales and the demand of the expanding market, YiLi medical company has grown from a single product to diversified products.Our main products are including breathing anesthesia product , urinary, and injection infusion, etc. Three family owned factories are running different product lines ensure we are able to offervarious products and offer you one-stop service.

1. Exhibition Information:

2. Product shipment information：