Add to Cart
Rigid series Polyether Polyol for Rigid foam for insulation Sucrose base, Sobitol base & Amine base
Description:
Rigid series Polyether Polyol for Rigid foam are prepared with different functionalities, hydroxyl values and viscosities based on different initiators. Mainly used in the production of polyurethane rigid foam system. These Polyol are mainly used to produce Rigid PU foam such as refrigerator, pipe insulation, sandwich panel, spray foam, wood imitation, solar heater, semi-rigid foam etc.
Technical data:
Type | Hydroxyl value/mgK | Moisture/% | PH | Viscosity/Mpa.s/25℃ | K% | Tone Value | Application |
JY4110A | 410-450 | ≤0.15 | 8-12 | 4000-6000 | ----- | ≤9 | Appliance, pipe, sandwich panel,spray foam, solar heater etc. |
JY8345 | 435-465 | ≤0.15 | 5-8 | 6000-10000 | ≤0.03 | ≤9 | Appliance, pipe, sandwich panel,spray foam, solar heater,wood imitation etc. |
JY8336 | 345-375 | ≤0.15 | 5-8 | 2500-4000 | ≤0.03 | ≤9 | Appliance, pipe, sandwich panel,wood imitation, full water blowing system etc. |
JY6205 | 365-395 | ≤0.2 | 5-8 | 2000-3000 | ≤0.05 | ≤8 | Appliance, pipe, sandwich panel,spray,solar heater,wood imitation etc. |
JY6001C | 400-430 | ≤0.15 | 8-12 | 5500-7000 | ---- | ≤9 | Appliance, pipe, sandwich panel,spray,solar heater etc. |
Pakage& Storage:
Store in new steel drums, 210KGS/drums.
The shelf life is 12 months. After that, the pre-test should be made before use
Remark: We only showed the Rigid Polyether Polyol which are normally used on the above, If any special requriment, Pls let us know, we can recommend you favorable materials.