Product Details
In-Vehicle Electronics: Navigation systems, display systems,
communication controllers .
Compared to the exterior trim, chassis, and engine compartment of a
car, the working environment for in-vehicle components is not as
"harsh". As the development of intelligent car cabins, autonomous
driving, and the automotive internet progresses, the number and
precision of in-vehicle electronic devices are increasing.
Different parts of the equipment have varying protection
requirements. For example, the main control panel inside the
vehicle needs venting membranes to balance pressure differences and
dust-proof sound transmission membranes to convey sound, while the
car's tailgate requires waterproof venting membranes. In-vehicle
electronics, under long-term operation, face several risks:
- Dust accumulation entering the housing, leading to device failure
- Temperature changes causing the device to operate under unbalanced
pressure for extended periods, damaging the housing seal and
thereby reducing protective capabilities.
The failure of in-vehicle electronics can also lead to severe
consequences. Enhancing the reliability of in-vehicle electronics
by installing breathable products is an economical and effective
solution. These breathable solutions ensure waterproof and
breathable performance while offering excellent stability,
providing customers with peace of mind.
Xinna waterproof and venting products: ePTFE adhesive venting
membrane , ePTFE welding membrane
ePTFE adhesive venting membrane:
- Simple installation, high breathability, customizable sizes
according to customer requirements, effectively enhancing the
operational stability and lifespan of in-vehicle electronic
devices.
- High breathability allows the equipment to effectively resist the
impacts of temperature changes and altitude-induced pressure
differences.
- Excellent chemical stability ensures consistent performance.
Welding Membranes Characteristics:
- Easy to weld, high protection level, high breathability, can
effectively enhance the operational stability and lifespan of
in-vehicle electronic devices.
- Customizable sizes according to customer requirements, offering
flexible design space for customers.
- Welding process significantly affects the final protection level of
the product; we can help customers precisely select models and
determine welding parameters to achieve optimal welding results.
Product Installation and Instructions:
- Ensure that the temperature of the waterproof breathable product
and the housing is above 10°C.
- When handling waterproof breathable products, please wear gloves or
use round-tipped tweezers to avoid direct contact with sharp
objects.
- The installation surface should be clean, free from oil, particles,
and other contaminants.
- The waterproof venting product should be installed on a flat,
vertical surface to prevent liquids or other contaminants from
accumulating.
- When using an automatic installation machine, follow the machine's
instructions. For manual installation, roll the release paper
underneath the waterproof venting product until it peels off easily
for pickup.
- Avoid prying the product off the release paper or folding it, as
this may damage the product. Waterproof Breathable Membrane .
Company Profile
Founded in 1994, Zhejiang XINNA Medical Device Technology Co.,ltd is a trusted and professional manufacturer of high-quality
membrane filtration products. As a high-tech enterprise integrating
R&D, production and sales, Xinna provides a wide range of
membrane filter products and solutions in the process of
filtration, sterilization and purification. ln terms of core
technology, it owns 7 patented technologies of joint research and
development of filter membranes with one of the best Universities
in China. The Nylon, PES, PP, PVDF, PTFE and other membrane filters
from us are widely used in medical devices,laboratory, healthcare,
air filtration and more fields.
Facilities
Our 161,458 square feet facilities are located in Zhejiang Province
of China, with 75,347 square feet as Class 100,000 Cleanroom. This
allows us to provide a superior level of cleanliness and
contaminate-free status of products to our customers including
medical device manufacturers, laboratories and healthcare
professionals all around the world.
Featured Products
1. Inline IV Filters & extension lines with IV filters &
Transducer protectors
- PTFE membrane for air evacuation
- Single or double-layer PES membrane as filter media
- Pore size: 0.22μm, 0.45μm,1.2μm, 2μm, 3μm, 5μm
2. Membrane Filters (PES, PTFE, NYLON, PET, PP, PVDF, GF )
- Hydrophilic or hydrophobic
- Pore sizes available: 0.22μm to 5μm
- Dimensions available: 13mm to 293mm disc filters or custom sheets
and rolls
3. Complete range of Syringe Filters with & without Prefilter
- Filter media: Nylon, PES, PVDF, PTFE, PP, GF etc
- Diameter: 13 mm, 25 mm
- Pore size: 0.22um / 0.45um
Certificates
We hold the ISO 9001:2009 and ISO 13485:2003 Certificates,
committed to maintaining a high standard of quality and safety in
our operation to ensure our products and services meet our
customers’ needs.
