Compositec Ceramic Lined Steel Pipe Mechanical Shock Resistance

​Product Description

Ceramic-lined steel pipe (ceramic-lined composite steel pipe) has the characteristics of good wear resistance, corrosion resistance, and high-temperature resistance, and is widely used in power plants, mines, cement plants, coal mines, etc.

​Features:

1. Good wear resistance: The lining ceramic layer of the ceramic lined steel pipe is corundum ceramic, and its Vickers hardness is above 1100HV. It is especially suitable for conveying (solid-gas), (solid-liquid), solid, and other media in electric power, mining, and coal industries. Its service life is more than 10 times higher than that of ordinary steel pipes.

2. Anti-corrosion and anti-scaling: Because corundum ceramic is a neutral material, it has the characteristics of being resistant to acid, strong corrosive medium and halogen salt corrosion, and also has anti-scaling performance.

3. Good high-temperature resistance: The ceramic-lined steel pipe can operate normally for a long time in the humidity range of -50℃ to 800℃, and the expansion coefficient of the composite pipeline is small.

4. Easy installation and construction: The weight of the product is lighter than other wear-resistant composite pipes of the same inner diameter, which can save 20%-35% of steel. It has heat resistance and mechanical shock resistance, so it can be connected by welding, flange, quick connector, etc. In this way, not only the construction and installation are very convenient, but also the installation cost can be reduced.

Reasons for Wear of Pipe

1. Mixing ratio: The lower the mixing ratio of material and air, the more serious the wear is.

2. Flow rate: The higher the flow rate of the material mixed with air in the pipeline, the greater the erosion and wear on the pipe wall.

3. Material properties: The more abrasive the material is, the more serious the wear will be.

4. Selection of pipe diameter and air volume: If the selection is improper, the wear will increase exponentially.

Finally, to prolong the service life of the ceramic composite steel pipe for pneumatic conveying, it is necessary to consider the mixing ratio of the conveyed material, the flow rate, and the diameter of the pipe. Simply increasing the hardness and thickness of the pipe wall is not the fundamental solution to the problem.

​Types:

Ceramic-lined composite straight pipe

Ceramic-lined composite elbow

Ceramic-lined composite tee

Ceramic-lined composite reducer

Ceramic-lined composite head

​Specifications:

1. Straight pipe: φ50—φ630

2. Elbow: 30°, 45°, 60°, 90°, 120°, 135°, 150° and other angles.

3. Tee: equal-diameter positive Y-type, oblique Y-type, special-shaped three-way.

4. four-way: equal diameter, different diameter, and other four-way.

5. Size head: all kinds of reducers.

​Scope of application:

Ceramic-lined steel pipe elbows are suitable for thermal power plants, mining, coal, steel, metallurgy, building materials, chemicals, and other industries, mainly for wear resistance, heat resistance, mechanical shock resistance, and thermal shock resistance. It is used for conveying ash, slag, pulverized coal, blast furnace coal injection, steelmaking red mud, sintered white ash, dust removal, ore powder, tailings, pulp, concentrate, ore powder, mud, cement, tin ore, copper ore, iron ore. It is an ideal wear-resistant pipeline for granular materials such as gold ore, sediment, and abrasive medium.

​Quotation notes:

1. After receiving the inquiry letter or drawing of the ceramic composite pipe from the customer, our company will provide the customer with the quotation list, delivery date, and other instructions as soon as possible.

2. Please indicate the specification and model: the inner diameter and outer diameter of the connecting pipe, and the angle and radius of curvature of the elbow should be provided separately, and whether there are other requirements at both ends of the elbow.

3. If you have the following instructions, please provide them together: specific requirements such as the working conditions of wear-resistant ceramic pipes, installation environment, fluid medium, temperature range, pressure range, etc.

YIbeino New Materials focuses on the research and development of new wear-resistant ceramic materials and is committed to providing material conveying, pneumatic conveying system engineering design and equipment wear problems under various complex working conditions for cement, thermal power, steel, coal, port, chemical, new energy, mineral processing, engineering machinery, concrete pipe pile, and other industries. We have 20 years of industry experience in the field of wear-resistant materials, We provide one-stop service from production to installation, according to customer demand for product design, research and development, production, processing, and other services.

The company has a professional anti-wear construction team. Relying on our strong technical strength and years of accumulated practical experience, we can provide timely solutions to various wear problems and select appropriate wear-resistant materials and construction plans based on actual working conditions. Rational product design, on-site construction, and comprehensive after-sales service can help you effectively improve the operating efficiency and service life of your equipment and solve equipment wear problems under various complex working conditions.

We have more than 20 years of industry experience in the field of wear-resistant materials and a group of experienced technical and management personnel. We can provide product design, research and development, production, processing, and other services according to customer needs. The company has a full set of advanced equipment for the production of wear-resistant products. Our company's main products are wear-resistant ceramic sheets, wear-resistant ceramic liners, ceramic composite pipes, wear-resistant ceramic elbows (lithium battery pneumatic conveying elbows), wear-resistant ceramic roller lagging, the overall equipment is lined with ceramics, ceramic pump truck pipes, alumina structural ceramics, ZTA ceramics and other series of products. The products have high strength, high hardness, good wear resistance, and corrosion resistance.

Hunan YIbeino New Materials Co., Ltd. has passed the ISO9001:2015 quality system certification. The company has a strict quality control system. Product design, manufacturing, and installation services are fully integrated into the ISO quality management system. From raw material purchase and ingredients, All aspects from production process management to factory inspection and control ensure stable product performance and excellent quality.

The company has users all over the world, mainly exporting to the United States, Germany, Sweden, India, Turkey, the Netherlands, Italy, Spain, Japan, South Korea, Russia, Vietnam and other countries. The company adheres to the business philosophy of "integrity, hard work, innovation" and adheres to the "customer We provide our customers with high-quality services based on the principle of "quality first", welcome to patronize us!

Company Advantage

The company is a manufacturing enterprise, we have many years of on-site industry experience and can provide customers with the best equipment anti-wear design, product samples, quality service, and competitive prices.

Company Honor

The product patents are as follows: "A kind of elbow of pump pipe discharge anti-clogging pipe", "A lining board installation structure", "A lining board processing console", "A conveying device for ceramic-lined pipes" etc.

Sales Network

Our products are exported all over the world. Our company has always insisted on the business principle of "quality, innovation, and customers first".

Our Product

Wear-resistant Ceramic Wear Liner

ZTA Ceramic wear liner

Wear-resistant ceramic composite liner

The Impact resistant ceramic wear liner

Ceramic-composite liner

Ceramic rubber liner

Ceramic-composite wear-resistant elbow

Wear-resistant ceramic composite pipe

Concrete pump parts

Wear-resistant ceramic sheet

Ceramic and rubber pulley lagging​

Cyclone lined with wear-resistant ceramic

Ceramic components