Wash Basin Drain Pop Up With Golden Colour

Kinds of basin drian

1. Pop-Up Drain: This type of basin drain has a stopper that can be pushed down or pulled up to open or close the drain. It is operated by a lever or knob on the faucet or on the drain itself. When the stopper is pushed down, it seals the drain to hold water in the basin, and when lifted, it allows water to flow out.

2. Grid Drain: A grid drain consists of a metal or plastic grid-like cover that sits directly over the drain opening. It allows water to flow through while preventing larger debris from entering the drain. Grid drains are commonly found in commercial settings where preventing clogs is important.

3. Push Button Drain: This type of basin drain features a push-button mechanism that is used to control the opening and closing of the drain. Pressing the button seals the drain, and pressing it again releases the water.

4. Clicker Drain: Clicker drains are operated by a mechanism that is typically controlled by a lever or button located on the faucet. When activated, the drain opens or closes with a clicking motion.

5. Flip-Top Drain: Flip-top drains have a hinged cover that can be flipped open or closed to control the flow of water. They are operated by manually lifting or lowering the cover.

6. Overflow Drain: An overflow drain is designed to prevent overflowing of water in the basin. It includes a small opening located near the top of the basin that connects to a separate drainpipe. If the water level in the basin reaches a certain height, excess water flows into the overflow drain and is directed to the main drainage system.

7. Bottle Trap Drain: A bottle trap drain is a type of basin drain that includes a curved section of pipe called a trap. The trap helps to prevent foul odors and gases from entering the room by trapping a small amount of water in the curve of the pipe.

How to clean a drain basin

1. Put on protective gear: Wear rubber gloves and, if necessary, safety goggles to protect yourself from any debris or contaminants that may be present.

2. Remove the grate or cover: If the drain basin has a removable grate or cover, carefully lift it off and set it aside. Some drain basins may have screws or fasteners holding the grate in place, so use a screwdriver or appropriate tool to remove them if necessary.

3. Clear away visible debris: Use a gloved hand or a small brush to remove any visible debris, such as leaves, twigs, or sediment, from the drain basin. Place the debris in a trash bag or bucket for proper disposal.

4. Flush with water: Use a hose or a bucket of water to flush out the drain basin. Direct the water into the basin and allow it to flow freely, helping to clear out any remaining debris or buildup.

5. Scrub the basin: If there are stubborn stains or residue inside the drain basin, you can scrub it with a brush or a scrubbing pad. Dip the brush or pad in a mixture of warm water and mild detergent or vinegar, and scrub the walls and bottom of the basin. Rinse thoroughly with water afterward.

6. Inspect and clean the drainpipe: Take a look inside the drainpipe connected to the drain basin. If you notice any obstructions or buildup, use a drain snake or wire brush to clean the pipe. Insert the snake or brush into the pipe and rotate it to dislodge any clogs or debris. Flush the pipe with water to clear out any loosened particles.

7. Reinstall the grate or cover: Once the drain basin and pipe are clean and clear, reposition the grate or cover back onto the basin. Secure it in place with screws or fasteners if required.

8. Regular maintenance: To prevent future buildup and clogs, consider implementing regular maintenance practices. This may include removing debris from the grate or cover regularly, inspecting and cleaning the drain basin periodically, and ensuring that the surrounding area is clear of any potential blockages.

Package Detail

OEM Logo Polybag, Colour Boxs, Colour Master Carton

• FAQ

Q: How long is your product guarantee period?
A: We have Two years guarantee and 24 hours full-time service.

Q: What is your MOQ?
A: Normal Each Items 3000pcs MOQ.

Q: Can you accept OEM,ODM?
A: we accpet OEM.

Q: How long is your delivery time?
A: 30-35 days After Confirm Order