Toilet Angle Stop Valve
HC-33020
- Size : 3/8"x1/2" 1/2"x1/2" 1/2"x3/4"
- Name: Brass Angle Valve
- Body Material: Brass
- Connection: Female Thread
- Power: Manual
- Media: Water, Oil
- Working Pressure: 10bar
- Working Temperature: 0-+80℃
- Style: Handle-controlled
- Surface Treatment: Chrome Plated
- Function: Kitchen, Home, and Garden
- Solid Brass: The valve is made of quality solid brass and
electroplated polished chrome
- Slowly Turn: Quarter turn valve means more effortless shutoff open
close and only need to turn 2 circles
Modern: Contemporary chrome finish. This designer angle valve stop
puts a premium touch on those ugly pipe fittings for sinks,
bathrooms, and toilet kitchen showers.
Parts of Valve angle
No. | Part | Materials |
1 | Body | Brass |
2 | Cartridge | Brass |
3 | Stem | Brass |
4 | Seal | EPDM/cartridge |
5 | Seal Gasket | NBR |
6 | O ring | NBR |
7 | Thread | BSP, 1/2″x1/2″ |
8 | Handle Wheel | Zinc Alloy |
9 | Finish | Polishing and chrome plated |
What is Toilet Angle Stop Valve
A toilet angle stop valve, also known as a toilet shut-off valve,
is a type of angle valve specifically designed to control the water
supply to a toilet. It is an essential component of the toilet's
plumbing system, allowing you to turn the water flow on or off to
the toilet fixture as needed.
The toilet angle stop valve is typically located on the water
supply line that connects to the bottom of the toilet tank. It is
usually positioned behind or beside the toilet bowl, near the floor
or wall. When the valve is open, water flows freely into the toilet
tank, allowing it to fill up after each flush. When the valve is
closed, it stops the water flow, preventing water from entering the
toilet tank.
The main purposes of the toilet angle stop valve are:
Emergency Shut-Off: In case of a toilet tank leak or malfunction, the angle stop valve
allows you to quickly shut off the water supply to the toilet. This
helps prevent water wastage, flooding, and potential damage to the
bathroom or adjacent areas.
Maintenance and Repairs: The valve makes it convenient to isolate the toilet from the rest
of the plumbing system when performing maintenance or repairs on
the toilet or the water supply line.
Replacing Toilet Components: When replacing toilet components like the fill valve, flush valve,
or flapper, shutting off the angle stop valve prevents water from
continuously flowing into the tank during the replacement process.
To operate the toilet angle stop valve, turn the handle clockwise
to close the valve and stop the water flow, and turn it
counterclockwise to open the valve and allow water to flow to the
toilet tank.
To ensure the longevity and reliability of the toilet angle stop
valve, it's essential to choose a high-quality valve made of
durable materials such as brass. Regularly inspect the valve for
any signs of leaks or deterioration and replace it if it shows
signs of wear or malfunction. If you're unsure about how to work
with angle stop valves or need assistance with toilet repairs,
consider seeking help from a professional plumber.
How to Replace Toilet Angle Stop Valve
Replacing a toilet angle stop valve is a straightforward process,
but it requires some basic plumbing knowledge and the right tools.
Here's a step-by-step guide to help you replace a faulty toilet
angle stop valve:
Note: Before you begin, turn off the water supply to the toilet by
closing the main water shut-off valve, which is usually located
near the toilet or in your home's utility area.
Tools and materials you'll need:
Adjustable wrench or pliers
Bucket or towels to catch any water that may still be in the pipe
New toilet angle stop valve
Pipe thread seal tape (Teflon tape)
Step-by-step replacement:
Drain the toilet tank: Flush the toilet to drain most of the water from the tank. To
remove any remaining water, use a sponge or towel to soak up the
water in the tank and bowl.
Remove the old angle stop valve: Locate the old angle stop valve attached to the water supply line
coming out of the wall or floor. Use an adjustable wrench or pliers
to loosen and remove the compression nut that connects the valve to
the water supply line. Be prepared for some water to drip out when
you remove the valve.
Prepare the water supply line: After removing the old angle stop valve, clean the end of the
water supply line to remove any debris or old sealant. Apply pipe
thread seal tape (Teflon tape) to the threaded end of the water
supply line to create a watertight seal with the new valve.
Install the new angle stop valve: Take the new toilet angle stop valve and thread it onto the water
supply line by hand. Ensure it's threaded on straight and tightened
securely by hand.
Secure the valve: Using an adjustable wrench or pliers, tighten the compression nut
onto the threaded end of the new angle stop valve. Again, be
cautious not to overtighten, as this can damage the valve or pipe.
Turn on the water supply: Once the new angle stop valve is securely installed, turn on the
main water supply to the toilet by opening the main shut-off valve.
Check for leaks: Observe the area around the new valve for any signs of leaks. If
you notice any leaks, tighten the compression nut slightly until
the leak stops.
Test the valve: Test the new angle stop valve by turning the handle clockwise to
shut off the water flow to the toilet and counterclockwise to turn
it back on. Ensure that the valve operates smoothly and effectively
shuts off the water supply when closed.
That's it! If you have followed these steps carefully, you should
have successfully replaced the toilet angle stop valve. If you're
unsure about any step or encounter unexpected issues, it's best to
seek assistance from a professional plumber to ensure the job is
done correctly and safely.