(2). Four network interfaces drive maximum 400000 pixels.
(3). It supports dual-monitor mode, multi-monitor extension mode
and duplication mode.
(4). Support the following resolutions: 1024x768, 1280x720,
1280x960, 1280x1024, 1360x765, 1360x1020, 1600x900, 1600x1200.
(5). Use the autorun USB to transmit and control data, which is
applied to both 32-bit and 64-bit operating systems.
(6)Auxiliary slave controller is H802RA and H801RC. Auxiliary
software is “LED studio software”
(7)Four ports are separated and configured individually, which
means four ports can drive different chips. Four ports control 1020
slave controllers in total, each ports control 255 slave
controllers.
(8) Data is transmitted based on standard Ethernet protocol and the
transmission distance is up to 100 meters.
2. Supported driver chipsLPD6803, LPD8806, LPD1882, LPD1889, LPD6812, LPD1883, LPD1886,
DMX512, HDMX, APA102, MY9221, DZ2809, SM16716, SM16711, UCS6909,
UCS6912, UCS1903, UCS1909, UCS1912, WS2801, WS2803, WS2811, WS2812,
INK1003, TM1812, TM1809, TM1804, TM1803, TM1913, TM1914,
TM1926, TM1829, TM190, TM1814, BS0901, BS0902, BS0825, BS0815,
LY6620, BS0825, LD1510, LD1512, LD1530, LD1532, TLS3001, TLS3002,
DM412, DM413, DM114, DM115, DM13C, DM134, DM135, DM136, MBI6023,
MBI6024, MBI5001, MBI5168, MBI5016, MBI5026, MBI5027, 74HC595,
6B595, TB62726, TB62706, ST2221A, ST2221C, XLT5026, ZQL9712,
ZQL9712HV, HEF4094, A8012, etc.
Note: H803TV supports more than the chips listed above(some chips have
the same sequence diagram, such as UCS2903 has the same sequence
diagram with UCS1903, so H803TV supports them all).
Package Include
1 pcs controller, 1 pcs USB cable, 1 pcs DVI cable, 1 pcs adaptor
3. Controller and Accessories display
H803TV Online MASTER Controller
Four ports of H803TV can drive different chips, each port can be
configured individually.
You can also connect multiple H803TVs to DVI distributer, each
H803TV just control part of the screen