

Add to Cart
Industrial or commercial fire rated steel roller shutter door
PRODUCT DESCRIPTION
We export a very wide range of steel rolling shutter doors for the industrial places where the opening often require high security and sometimes in very large sizes. Fire rated roller shutters are made of steel and are similar to regular steel roller shutter doors.They are usually used as part of an overall fire strategy to prevent fires from spreading too fast in buildings.
Fire rated shutters are equipped with a thermal fusible link mechanism which causes the shutters to lower on their own once a certain temperature is reached. The descend happens when the brakes of the motor are released.They are sometimes linked to the building's security system and can also be activated once the fire alarm goes off.In the event of a fire, the lowering of the shutters helps to create a compartment within the building to prevent the fire from spreading too quickly so as to enable everyone in the building to escape in time.
They are designed to withstand fires for up to 4 hours depending on the fire rating selected. Types of fire rating available are 1, 2 and 3 hours. 2-hour fire rated shutters are the most popular type of fire rated shutters installed in buildings.Fire shutters can be customised to fit the size of your premises.
They also come with a manual hand chain which may be used to raise
or lower the shutters in case of a power failure.
Optional items which can be provided are the Electronic Release
System, smoke senser tempeture sensor and more.
Fire rated shutters are also sometimes made a requirement for
certain types of properties such as factories, shopping malls,
hotels and train stations due to fire safety reasons.
The width and height of a door will often define the model of steel
rolling shutter slats to be used as each have
their limits and depend on the security level required. We produce
80mm width double skin steel Rockwool insulated slats with our high
automatic roll forming machine, which can produce 500 square meters
per day.
APPLICATIONS:
Fire rated steel roller shutter doors are suitable for all establishments, expecially for the areas in high risk of fire. our fire rated steel rolling shutters can be used for a wide variety of commercial, industrial areas.
KEY FEATURES:
1,Increased Evacuation Time:Our steel curtains are designed and
manufactured with durability and strength in mind. The galvanised
steel construction not only provides excellent resistance to rust
and corrosion, but it also adds an extra layer of protection
against forced entry. Plus, with the option to upgrade to a thicker
steel curtain, you can rest assured that your property is as secure
as possible.Increased Evacuation Time: By containing the fire and
limiting its spread, fire-rated roller shutters provide valuable
time for property occupants to evacuate safely.
2,Reduced Property Damage: The containment of fire within a
specific area greatly reduces the extent of the damage to the
property, potentially saving valuable assets and minimising the
cost of repairs and restoration.
3,Compliance with Fire Safety Regulations: Installing fire-rated
roller shutters in line with local building codes and fire safety
regulations helps ensure that your property meets the requisite
standards, thus avoiding penalties and enhancing the overall safety
of occupants.
PROJECT PHOTOS
PRODUCT DRAWING
STEEL SLAT PHOTOS:
TECHNICAL SPECIFICATIONS
Curtain:The rolling shutter curtain itself consists of Consisted of solid
interlockig galvanized rockwool insulated steel slats, with steel
end clips on both sides of curtain to prevent lateral movement.
Thickness option: 0.8 mm, 1 mm for both skin of slat, total
thickness18mm
Bottom rail:
♦Material: rollformed galvanized steel
♦With plastic end caps on both sides
♦Dimension:40*90mm, Depth*Height
Guide rail:
♦Material: rollformed galvanized steel
♦Dimension:100*60mm, Width*Depth
♦Thickness available: 1.2mm, 1.5mm
Shaft / Axle:
♦Material: galvanized steel
♦Diameter: 6 inches, 8 inches, 10 inches
♦Wall thickness: 2 mm, 2.5 mm, 3 mm, 4 mm
Side plates / brackets
♦The brackets are manufactured from mild steel and supplied in
premed finish
♦The brackets can only be installed on a structural fixing surface
such as concete, steel columns, steel
angles are normally used to supported the brackets if needed
♦With plates slotted to accommodate shaft or motor mounting.
Operation way:
♦Automatic operation with motor(remote controls, switch button)
Optional:
♦Shutter box / hood cover
♦Wicket door
CERTIFICATION
FAQ
*What is a fire-rated roller shutter?
A fire-rated roller shutter is a type of shutter made from fire-resistant materials that is designed to withstand fire for a specific period of time. It is typically installed in windows, doors, or other openings in buildings to prevent the spread of fire and protect people and property from harm.
*What materials are used to make fire-rated roller shutters?
Fire-rated roller shutters can be made from a variety of fire-resistant materials, including fire-resistant glass, rocl wool,and other high-temperature resistant materials. The specific material used depends on the desired level of fire resistance and the application.
*What is the typical lifespan of a fire-rated roller shutter?
The lifespan of a fire-rated roller shutter depends on several
factors, including the material used, the level of fire resistance,
and the frequency and severity of use. In general, however,
fire-resistant roller shutters are designed to last for several
years and can be expected to remain functional even in the event of
a fire.
*How do I maintain a fire-rated roller shutter?
The maintenance requirements for fire-rated roller shutters depend
on the specific materials and design used. Generally, they should
be inspected regularly for any signs of damage or wear, and if
necessary, cleaned and lubricated to ensure smooth operation. If
any repairs or replacements are required, it is essential to use
the services of a trained professional to ensure the work is done
correctly and safely.