1/2BSP Flush Diaphragm Pressure Transmitter 4-20mA Industrial Pressure Transducer

1. When selecting the product, please ensure that the medium to be measured is compatible with the contact parts of the product.
2. When placing an order, please note that explosion-proof type products do not include digital display heads.
3. When ordering transmitters with an LCD or LED display head, the power supply for the transmitter should not be lower than 20VDC.
4. To ensure reliable operation of the product, it is recommended that users install lightning protection devices on-site and ensure that the product and power supply are reliably grounded.

5. Select the appropriate material according to the characteristics of the measured medium to prevent the corrosive effect of the medium on the pressure transmitter. If the medium is corrosive, the pressure transmitter of a corrosion-resistant material should be selected.
6. In order to ensure the accuracy of the measurement, it is recommended to calibrate the pressure transmitter regularly. The calibration period can be determined according to the use environment and requirements.
7. Select the appropriate protection level according to the actual requirements. If the equipment will be exposed to wet, dusty or other harsh environments, choose a pressure transmitter with a higher level of protection.
8. Regularly clean the surface of the device to ensure that the cable is properly connected. If abnormal conditions (such as leakage, damage, etc.) are found, they should be repaired or replaced in time.
9. The flat film pressure transmitter has the advantages of long life, low power consumption, easy installation and maintenance, but the above matters still need to be paid attention to during use to ensure its normal operation and accurate measurement of pressure.