ANSI C136.31-2023 Standard Interpretation for Laneway and Regional Lighting Equipment

ANSI C136.31-2023 Standard Interpretation

Latest Standards | National Standards for Road and Regional Lighting Equipment in the United States Vibration NEMA ANSI C136.31-2023 Standard Interpretation

1 Test Scope:

This standard covers the minimum vibration resistance and vibration test methods for laneway lamps and regional lamps. This standard does not apply to natural disasters or catastrophic disasters.

2 The vibrations caused by the outside world in the actual use of road area lighting include the following two aspects:

a. Vibration caused by wind.

b. Vibration caused by passing vehicles.

3 Test method:

3.1 Resonance frequency search

Frequency range (Hz): 2-30;

Acceleration (g): 0.2;

Sweep rate (oct/min): 1;

Test axis: X, Y, Z.

That is: within the frequency range of 2~30Hz, with an acceleration of 0.2g and a sweep rate of 10ct/min, measure the resonant frequency of the lamp on three axes (X/Y/Z), and perform durability test (resonance frequency) at the most severe frequency.

3.2 Constant frequency endurance test

Test frequency: The resonant frequency measured in 3.1; if there is no resonant frequency, test at 30Hz;

Acceleration: Select from Table 1/Table 2, 3g is the most common;

Number of tests: 100,000 times.

Test time T=N/60f N is the number of tests, f is the test frequency

For example: if the resonant frequency is 6.95Hz, the test time T=4 hours

Picture

Picture

4 Actual case:

(The following figure is a special tooling for street lamps, simulating the actual installation status)

Picture

About Us

Shenzhen LCS Compliance Testing Laboratory Ltd., abbr. for LCS, was founded in 2004 in Shenzhen, LCS is now growing into an independent comprehensive third-party institution which focuses on test & certification. Profound technical background and diligent working attitude decided LCS with an outstanding high starting point from the outset，pioneering spirit and consciousness of keeping pace with the times which predestined the thoroughly tempered course of LCS.

Our Labs

LCS Founding Members have engineering background and had gradually built up Safety Lab, EMC Lab, RF Lab, SAR & HAC Lab, Reliability Lab, Lighting Electrical Lab, LED Lighting Performance Lab, Energy Efficiency Lab, Electronic Cigarette Testing Lab, Chemistry Lab, BQTF, Environmental and Occupational Evaluation Lab, Battery Lab, Toy Lab, Textile Lab, Food and Food Grade Material Lab. The establishment of our comprehensive labs ensure our test and certification scope covers almost all fields, such as Reliability and Safety test, EMC test, Chemical Hazardous Substances test, Material Analysis, Food Contact Material test, Bluetooth Test & Certification, Environment and Occupational Health, Performance test of spare parts of Automobile and so on.

Authorization

Moreover, LCS won many authorized qualifications both domestic and overseas. LCS is recognized as IEC/ISO17025 laboratories accepted by CNAS and NVLAP, accredited by CPSC, CMA, accredited for CQC, ISTA, CBTL, SASO, SABS. Meanwhile LCS become laboratory authorized by TUV, BQTF issued by the SIG. LCS had also signed cooperation agreements with FCC, ISED, ETL, CEC, UL, E-Mark, CETECOM, KTC, SAA Approval and many other authoritative institutions, hence we can provide our clients with efficient and professional service for product test and certification.

Experience

Our RF experience ranges from WLAN (802.11b/g/n/a/ac), Wi-Fi 6E, Bluetooth (802.15.1), ZigBee (802.15.4), Z-Wave, UWB (802.15.3), WiMAX (802.16), SRD, DECT, RFID, NFC, GSM, WCDMA (+HSDPA/HSUPA), LTE, 5G (NR/VoNR/eMTC/eMBB/URLLC),UHF/VHF, WHDI, AM, FM, DAB, DVB, GPS, GNSS, COMPASS, GLONASS and more. The products we are mostly working with are basestations, client adapters, laptops, cordless phones, baby monitors, cellulars, radars, sensors, scanners, receivers, immobilizers, remote controls, etc. Modern products incorporate not often one, but a variety of co-existing technologies.

Welcome

LCS is a reliable party. With more than 20 years hands-on experience in the field of Radio, Telecom, EMC and Safety certification, including country approvals worldwide, we will guide you with our knowledge. You are very welcome!

We will be pleased to assist you with your questions or inquiries, please contact us.