Japan TELEC Certification Radio Equipment Type Approval For Radio Frequency Equipment
Contact Now
Add to Cart
Site Member
Location:
Shenzhen China
Address:
101, 201 Building A and 301 Building C, Juji Industrial Park, Yabianxueziwei Shajing Street, Baoan District, Shenzhen, 518000, China
Supplier`s last login times:
within 20 hours
Product Details
Company Profile
Product Details
Japan TELEC certification
Certification introduction
Japan’s certification for radio frequency equipment is called Radio
Equipment Type Approval. The official control agency is MIC
(Ministry of Internal Affairs and Communications) of Japan. The
main certification agency is TELEC (Telecom Engineering Center)
designated by MIC. There are also RF Technologies
/JQA/SGS/ITS/TUV/UL, etc., there are a total of 12 certification
agencies, so it is usually called TELEC certification. It is also
called MIC certification, RF certification, GITEKI certification,
and technical fitness certification, which is similar to the
domestic SRRC certification.
TELEC certification follows Japan's Radio Law, and the specific
test specifications follow MIC (Japanese Ministry of Internal
Affairs and Communications) Notice No. 88 regulations. According to
the requirements of Japan's "Radio Wave Law", the production, sale,
and operation of wireless equipment in Japan must comply with
technical regulations approved by MIC, and it is mandatory to apply
for a type approval certificate (ie TELEC certification) for radio
equipment.
Japan TELEC
TELEC certification basic information
Is it mandatory: Mandatory certification
Factory inspection requirements: No requirement, but ISO
certificate or recognized quality control documents are required
Certificate holder requirements: No requirements
Certificate validity period: None
Certification cycle: about 4 weeks
Technical information: Voltage frequency AC 100V/200V, 50Hz /60Hz,
plug JIS 8303
Instructions for TELEC certification, GITEKI certification, MIC
certification and MARK technical fitness certification
·TELEC certification and GITEKI certification
The full name of Japan's TELEC is TELECom Engineering Center. It is
the certification agency of the "Radio Wave Act" recognized by the
Ministry of Internal Affairs and Communications of Japan. In 2014,
the TELEC organization also obtained the certification
qualification of the "Electrical Communications Business Act". Now,
in popular terms, TELEC certification is equivalent to GITEKI
certification. .
·TELEC certification and MIC certification
The Ministry of Internal Affairs and Communications of Japan is
abbreviated as MIC, and its full English name is Ministry of
Internal Affairs and Communications. The Ministry of Internal
Affairs and Communications is the regulatory agency for Japan's
"Radio Wave Law" and "Electrical Communications Business Law".
Generally speaking, MIC certification is equivalent to TELEC
certification.
·TELEC certification and MARK technical fitness certification
After passing the TELEC certification, the product can be printed
with the GITEKI logo. GITEKI comes from the Japanese name for
certification: "techie マーク". The Japanese characters spell GITEKI
in romaji, so GITEKI certification is also called technology
certification. GITEKI certification and Technical fitness
certification is just a different name.
Certification classification
TELEC certification includes test certification (Test
Certification) and type certification (Type Certification). Test
certification is verified for each equipment unit, and the
certification is only valid for each verified equipment unit;
Type certification refers to the verification of samples of a batch
of equipment of the same design and manufacture. The certification
is valid for this batch of equipment, but if the design or
manufacturing of the equipment changes, the equipment will need to
be re-certified.
It is worth noting that the use of non-low-power radio stations and
their terminal equipment requires application for a license from
the MIC. In addition, there are two situations for compliance
certification of telecommunications terminal equipment:
· For ordinary telephone equipment, JATE certification only needs
to be carried out in accordance with the requirements of the
Telecommunications Business Act;
· For wireless terminal equipment, in addition to JATE
certification required by the Telecommunications Business Act,
TELEC certification is also required according to the Radio Act.
Applicable product range
TELEC certification is for wireless radio frequency products
including: Bluetooth products, ZigBee products, telemeters, WiFi
products, wireless microphones, pagers, LTE·RFID (2.4GHz, 920MHz)
products, UWB radio systems, GSM products, etc.
application process
1. Fill in the application form and prepare information and samples
2. The testing agency reviews the information and preliminarily
tests the samples
3. The testing agency formally applies to an institution recognized
by the MIC of the Ministry of General Affairs.
4. Institutional review documents
5. Sample testing and providing test report (can be tested by
authorized laboratory)
6. After the documents and test reports are passed, Japan MIC will
issue the certificate.
Application materials
1. Technical model specification table
2. Quality management system statement
3. Quality control confirmation method or manufacturer’s ISO 9001
certificate
4. Confirmation letter of construction guarantee
5. Rated power statement
6. Antenna report
7. Test report including test results, photos of test setup and
inspections performed)
8. Block diagram, schematic, bill of materials, parts placement, IC
data sheet, interior and exterior photos, product description, user
manual, operating/technical instructions, accessory instructions)
9. Tag information (tag location, tag content)
10. If you are an agent or authorized representative of the
manufacturer, you also need a letter of authorization/authorization
letter
Certificate information
TELEC certification
Certification fee
The cost of TELEC certification varies according to different
products and functions. For example, if a product has Bluetooth,
WIFI function, or 2.4GHz function, the cost will be different
depending on the number of functions. Even Bluetooth single-mode
and dual-mode have different costs. Specific TELEC certification
fees need to be assessed and quoted. Most TELEC certification
quotes for common products start at 10,000 yuan.
other
Bluetooth and WIFI product testing requirements
Test certification is verified for each equipment unit, and this
certification is only valid for each verified equipment unit; the
test items for WiFi and Bluetooth products are basically similar to
the European standard EN300 328. Among them, 2.4GHz WiFi products
(802.11b /g, 2412~2472 MHz) and Bluetooth products use the MIC
Notice No.88 Annex43, but for the 14 channels of 2.4GHz WiFi
products (Channel 14: 2471 ~ 2497MHz), Annex44 needs to be used
separately for testing and reporting. Corresponding fees also need
to be increased. For 5GHz WiFi products (802.11a, 5180~5320MHz, W52
Band and W53 Band), the test standard followed is Annex45. However,
it should be noted that the data shows that MIC will modify Annex45
in the near future and include 5.6GHz equipment (Band W56). It is
classified as Annex45 and has more stringent DFS test requirements
for the Band 56 frequency band.
Bluetooth product test content
1. Frequency Error Measurement
2. Coupling bandwidth/carrier frequency bandwidth test (Occupied
Bandwidth and Spread-spectrum Bandwidth / Factor)
3. Unwanted Emission Intensity Measurement
4. Antenna Power Error Measurement
5. Receiver spurious disturbance test (Limitation of Collateral
Emission of Receiver Measurement)
6. Transmission Antenna Gain (EIRP Antenna Power) Measurement
7. Transmission Radiation Angle Width (3dB Beamwidth) Measurement
8. Duty Cycle Measurement
9. Retention time test
Japan TELEC Certification Radio Equipment Type Approval For Radio Frequency Equipment
Inquiry Cart
0