1.25G SFP Transceiver Module With Detailed Product Information For Easy Identification

30-meter 10G based industrial Copper Transceiver

Application

• 10 Gigabit Ethernet over Cat 5 cable
• Switch/Router to Switch/Router Link
• High speed I/O for file severs

Description

1. This copper SFP transceiver is high performance, cost effective module compliant with the 10 Gigabit Ethernet supporting 10Gb/s full duplex data-links with 5-level Pulse Amplitude Modula-tion (PAM) signals.
2. All four pairs in the cable are used with symbol rate at 250Mbps on each pair.
3. It provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2-wire serial CMOS EEPROM protocol.
4. The physical IC can also be accessed via 2-wire serial bus at address ACh.

Dimension

SFP to Host Connector Pin Out

1. TX Fault is not used and is always tied to ground through a 100 ohm resistor.

2. TX Disable as described in the MSA is not applicable to the 1000BASE-T module, but is used for convenience as an input to reset the internal ASIC. This pin is pulled up within the module with a 4.7 KW resistor.

Low (0 – 0.8 V): Transceiver on

Between (0.8 V and 2.0 V): Undefined

High (2.0 – 3.465 V): Transceiver in reset state

Open: Transceiver in reset state

3. Mod-Def 0,1,2. These are the module definition pins. They should be pulled up with a 4.7-10 KW resistor on the host board to a supply less than VCCT + 0.3 V or VCCR + 0.3 V.

Mod Def 0 is tied to ground through a 100 ohm resistor to indicate that the module is present.

Mod-Def 1 is clock line of two wire serial interface for optional serial ID

Mod-Def 2 is data line of two wire serial interface for optional serial ID

4. RD-/+: These are the differential receiver outputs. They are ac coupled 100 ohm differential lines which should be terminated with 100 ohm differential at the user SerDes. The ac coupling is done inside the module and is thus not required on the host board. The voltage swing on these lines will be between 370 and 2000 mV differential (185 – 1000 mV single ended) when properly terminated. These levels are compatible with CML and LVPECL voltage swings.

5. VCCR and VCCT are the receiver and transmitter power supplies. They are defined as 3.3 V ± 5% at the SFP connector pin. The maximum supply current is about 300mA and the associated in-rush current will typically be no more than 30 mA above steady state after 500 nanoseconds.

6. TD-/+: These are the differential transmitter inputs. They are ac coupled differential lines with 100 W differential termination inside the module. The ac coupling is done inside the module and is thus not required on the host board. The inputs will accept differential swings of 500 – 2400 mV (250 –1200 mV single ended), though it is recommended that values between 500 and 1200 mV differential (250 – 600 mV single ended) be used for best EMI performance. These levels are compatible with CML and LVPECL voltage swings.

Feature

• Up to 10Gb/s bi-directional data links
• Hot-pluggable SFP footprint
• Extended case temperature range (-40°C to +85°C )
• Fully metallic enclosure for low EMI
• Low power dissipation
• Compact RJ-45 connector assembly
• Detailed product information in EEPROM
• +3.3V single power supply
• Access to physical layer IC via 2-wire serial bus
• Compliant with SFP MSA
• Compliant with IEEE Std 802.3TM-2002
• Compliant with FCC 47 CFR Part 15, Class B
• RoHS Compliant Products

Specification

Shenzhen iseelink Communication Technology Co., Ltd. is a high-tech enterprise that focuses on research and development, production, and sales of products in the field of optical communication. The company's product design and development are based on market and user needs, with a focus on bringing out products that excel in performance.

The product range includes more than ten series, including optical switches, optical protection equipment, optical cable monitoring systems, optical test instruments and meters, CWDM/DWDM, OEO optical relay amplifiers, fiber optic transceivers, optical amplifiers, optical modules, and passive devices. These products are able to meet the needs of various industries including telecommunications, radio and television, power, transportation, finance, education, enterprise, energy, etc., providing users with a variety of comprehensive and customizable solutions. With high reliability, strong environmental adaptability, and stable quality, iseelink has received wide acclaim from users, and its market share is steadily increasing.