Product Details
Overview for Alumina Tube
The alumina ceramic tube (99.6% Al2O3 material) can be used at
operating temperature upto 1750C degree in both oxidizing and
reducing tmospheric conditions. Alumina Tubes could be evacuated
max to 10-3 Torr under temperature 1600 degree C. It proves inert
to carbon and refractory metals in many severe situations..
Product illustration
Various diameters of alumina ceramic tube for LABORATORY TUBE
FURNACES
Various diameters of alumina ceramic tube for LABORATORY TUBE
FURNACES
Technical Specifications
Diameter range | OD40-100mm |
Tube length | 500-2000mm |
Wall thickness | 5mm |
Chemical composition | Al2O3>99.6%, SiO2<0.1, Fe2O3<0.05, R2O<0.1 |
Temperature controller | - Shimaden PID controller Auto-tune function Programmable 32 segments
Temperature accuracy +/- 1°C
|
Tmax resistant | 1750 degree C |
Warning | - Please don’t use alumina tube with vacuum above temperature >
1600 oC.
- Please always keep the heating or cooling rate less than 5C/
minute.
- Please handle the tube carefully. No any warranty for the tube
|
Notes: Standard sizes OD40mm, OD60, OD100mm etc are available,
other size can be produced as per customer’s requirements
Application Notes
The alumina content of the ceramic tube is more than 99.6%, the
bulk density (g/cm2) ≥ 3.80, and continuous working temperature is
1600°C. The alumina tube features high-purity and high-temperature
high-quality characteristics, but most corundum materials have poor
thermal shock resistance so need to be cautious and careful during
operation.
- For the first time using, it needs to be preheated to eliminate
stress and pollutants. Set the heating rate of 5~8℃/min, heat up to
1300℃, keep it for 30 minutes. The temperature rise speed should
not be too fast, and the temperature cooling rate should be set.
The temperature rise rate should not be higher than 10°C/min, and
the temperature cooling rate should be lower than 10°C/min (5°C per
minute is better).
- When load and unload the samples, the furnace temperature should
not be higher than 200 degrees. In addition, do not touch the
furnace tube at high temperature with low temperature objects.
- Make sure the heated material moisture less. For crystal water and
samples with high water content generated during heating, it is
recommended to dry the material firstly, and then put them in the
corundum furnace tube for sintering.
- When purging the atmosphere gases, pay attention to controlling the
gas flow rate to avoid breaking due to the large temperature
difference.
- Furnace tube support frames are welded on both sides of the furnace
to avoid deformation and crack because of gravity.
- Put insulation ceramic plugs inside the tube.
- After using it, keep the inside of the tube clean, make sure no
sample remains.
Company Profile
Program Thermal Tech (Luoyang) Co., Ltd, (hereinafter referred to
Programtherm, owning its manufacturing plant Luoyang Pure Furnace
Co., Ltd) has more than 16 years of experience in furnace heating
industry, with capabilities in Designing and Manufacturing lab
& Industrial Furnaces independently for various applications.
Programtherm products mainly cover muffle furnaces, tube furnaces,
elevator furnaces, car bottom furnaces, atmosphere furnaces, vacuum
furnaces etc with Max working temperature reaches up to 1750 degree
C. In addition to the mentioned wide range of standard products,
our powerful engineer group also support customized services
according to customers’requirements.
Programtherm is owning total manufacturing facilities of 1500
square meters and more than 30 staffs and a group of experienced
engineers. 5S management system; Products have been successfully
exported to more than 40 countries and regions around the world.
Such as Europe, South Asia, South America, Australia, New Zealand
and Africa etc. Our self-developed high-temperature heating
equipment has provided great help for universities, scientific
research institutions and industrial and mining enterprises.