Product Details
Product Overview for Rotary Tube Furnace
PTR D300/500/12 is a highly customized CE certified OD300mm large
ROTARY and TILTING tube furnace (Tilting degree to 90) with
complete vacuum sealing flanges. Furnace tube was build with 310SS
tube. The furnace equips with a Hydraulic station for 90 degree
tilting, rotating speed 0.1-5RPM, heating zone 500mm in length and
controlled by a precision 40 segments of digital temperature
controllers independently. The heating zone is heated by HRE
Heating wires up to 1200°C. It is an excellent furnace to process
powder materials, and also can be used for nano or film growth by
CVD.
Main Features
- Tmax 1100 °C
- Rotating, vertical tilting tube furnace
- Dual steel structure, split furnace chamber easy access to the
furnace tube
- Multiple atmosphere processes in a single cycle are available
- Fiber-insulated chamber with all round heating wires ensure uniform
temperature
- Yokota Up35 intelligent temperature controller with programmable 40
segments
- SS310 tube with blades build inside for material stiring
- Long life type N thermocouple
- CE certified, standard
Safety Measures
- Built-in ammeter and dual voltmeters for easy monitoring and
troubleshooting.
- Overheat protection shuts down the tube furnace if temperature is
outside of acceptable range (refer to controller's manual) or when
the thermocouple is broken or malfunctions
- Power failure protection resumes furnace operation right after the
point of failure when power is reestablished
- Microprocessor based self-tuning PID control provides optimum
thermal process with minimal overshoot
Product Gallery
Front View for Rotary Tube Furnace 1200 degree C
Side view for 1200C Rotary VERTICAL Tube Furnace
Technical Specifications
Model No. | PTR D300/500/12 |
Heating zone | - Heating zone length 500mm
- Uniform temp zone: 230mm
|
Power supply | 15KW AC415V, 50/60Hz, single phase |
Working temperature | - Tmax 1100°C
- Continuously 1000°C
- Temperature uniformity +/- 5C
|
Temperature controller | - Single digital controllers with microprocessor-based PID control
and self-tuning, touchscreen panel
- Programmable segments for heating, cooling and dwelling.
- Built-in PID Auto-Tune function with overheating & broken
thermocouple protection.
- Over-temperature protection and alarm allow for operation without
attendant(s).
- +/- 1 ºC temperature accuracy.
|
Heating rate | ≤20°C /min |
Thermocouple | N type |
Chamber lining | Mitsubishi raw material high alumina 1500 grade fiber board |
Furnace tube | - 310SS tube OD300/120mm
- Temperature resistance 1000 degree C
- Built material stirring blades inside the tube
|
Vacuum flanges | - Pair of SS304 flanges with needle valves
|
Atmosphere gas | Argon, Nitrogen, etc |
Heating element | - HRE heating element
- Note: Heating elements are consumable, and not covered by warranty,
we recommend to order extra set of heaters as spareparts
|
Tilting angle | 1-8° freely adjustable |
Rotary speed | |
Shipping info | Weight: 1900kgs W1600xL3000xH2250mm |
Compliance | CE, ISO |
Warranty | 2 years limited warranty with lifetime technical support |
Application Notes
- Don't fill any explosive gasses such as Hydrogen or Methane into
the furnace tube without necessary safety controls and supervision
- 1700C tube furnaces with alumina tube are designed for use under
vacuum and low pressure; 0.2 bars / 3 psi / 0.02 MPa
- To minimize the cracking rate of the ceramic tubes, please change
the position (mark four points on the tube) each batch
- Small cracks may appear on the surface of the refractory ceramics
over extended use. This is a normal occurrence and the cracks may
be repaired with alumina coating
Company Profile
Program Thermal Tech (Luoyang) Co., Ltd, (hereinafter referred to
Programtherm, owning its manufacturing plant Luoyang Pure Furnace
Co., Ltd) has more than 16 years of experience in furnace heating
industry, with capabilities in Designing and Manufacturing lab
& Industrial Furnaces independently for various applications.
Programtherm products mainly cover muffle furnaces, tube furnaces,
elevator furnaces, car bottom furnaces, atmosphere furnaces, vacuum
furnaces etc with Max working temperature reaches up to 1750 degree
C. In addition to the mentioned wide range of standard products,
our powerful engineer group also support customized services
according to customers’requirements.
Programtherm is owning total manufacturing facilities of 1500
square meters and more than 30 staffs and a group of experienced
engineers. 5S management system; Products have been successfully
exported to more than 40 countries and regions around the world.
Such as Europe, South Asia, South America, Australia, New Zealand
and Africa etc. Our self-developed high-temperature heating
equipment has provided great help for universities, scientific
research institutions and industrial and mining enterprises.