Add to Cart
SOCAY NTC Thermistor MF72-SCN8D-11 in Stock Body Size Ф11mm for LED Driver Circuit
DATASHEET: MF72-SCN8D-11_v2105.1.pdf
Part Number | Resistance at 25℃ ±20% | Max. Permissible Working Current | Resistance under Load (mΩ) | Dissipation Factor | Thermal Time Constant | Maximum permissible capacitance @240Vac |
R25(Ω) | Imax(A) | (mΩ) | δ(mW/℃) | τ(Sec.) | C(μF) | |
MF72-SCN8D-11 | 8 | 3 | 255 | 14 | 47 | 220 |
Features:
|
Applications:
u Switch mode power supply u Electric motor u Transformer u Adapter u Projector u Halogen lamp u LED driver circuit |
Storage Conditions of Products:
u Storage Conditions: Storage Temperature: -10℃ ~ +40℃. Relative Humidity: ≤ 75%RH. Keep away from corrosive atmosphere and sunlight. u Period of Storage: 1 year. |
Part Number | Type of L | Quantity (pcs/bag) |
MF72-SCN8D-11 | Lshort | 1000 |
Llong | 500 |
Item | Test conditions / Methods | Test Result |
Tensile Strength of Terminals | Fasten body with a Load Applied to each lead 3.0Kg for 1sec. | No break out and damage |
Bending Strength of Terminals | Fixed body hand 1.0kg on one terminal bend 90 then back again oppsite. | No break out and damage |
Solder Ability | When the Lead wire was dipped into bath 0f 235 ± 5 ℃ for 3 seconds after immersion in 25% rosin flux the solder ability ratio of lead wire surface should more than 95%. | More than 95% solder ability |
Temp. Cycle Test | (-40℃×→+25℃×3min) × 5Cycles (-85℃×→+25℃×3min) × 5Cycles | ∣ΔR/R∣≤ ±20 % |
Humidity Test | 45℃ 95%RH×1000 hours | ∣ΔR/R∣≤ ±20 % |
Load Life | 6 AMP×1000 hours | ∣ΔR/R∣≤ ±20 % |
Insulation Test | DC 700V | R≥500MΩ |